John Burk wrote: > Hello All, > > Happy November already! > > > We switched from AT&T POTS lines to Vonage VOIP service a while back but > have lost the availability to add names to inbound caller ID numbers that > call us. > > The TD1232 has a feature that allows up to 500 numbers in a list that > compares the inbound caller ID number to that list and then associates the > number with the name that I put into the list. > > With AT&T it worked great, so all inbound cell phone calls I keyed in a name > to be associated with the cell number and when that person called, it showed > 314-xxx-xxx "Joe's Cell". > > Now with the Vonage service i've lost that feature. Seems the Vonage > network is sending "1" and they claim they can't remove the "1" from being > sent before each of the numbers. > > Is there something I can do in the programming to make this work again? > > > > Any assistance is appreciated! >
Are you sure Vonage isn't sending the phone number in the "name" field as well as the "number" field. Att provisioned for number (only) delivery does not send a name field. In the past, we discovered the td will not do the table substitution if the CO sends anything in the name field. You can strip the "1" in the 125 and 126 setting (delete 1, add none). But I don't think that will fix the substitution problem. This is affected by the local area code field too, with mandatory 10 digit, we use "999" as area code. Years ago, we had a client that went from name delivery to name and number delivery. We lost the ability to replace "their name" with "N E Branch" based on the number. Let us know if you find a hidden fudge bit (990) to fix it! cid was such a kludge when they added name and number starting with -1 -larry _________________________________________________________________ KX-T Mailing list --- http://kxthelp.com/ Subscription changes: http://kxthelp.com/mailman/listinfo/kxt
