Other than checking the wiring and whatever Larry mentioned, I have heard of port problems clearing by resetting the system.
It worked at lease once for me - I had expansion cards with bad digital ports. I put it on a cabinet, re-initialized the system, and the bad ports came back to life. It did not work every time, but it did work at least for one card I worked on. (of course, be sure you back up the software to reload it) Charles Patterson [email protected] Patterson Communications, Inc. Tarrytown, NY On Sun, Mar 8, 2009 at 3:19 PM, Larry <[email protected]> wrote: > Do you have dc voltage on the pair? about 16-17vdc is normal. do you > have this dc level on the black pulse transformer on the port card? if > you swap the upper and lower port card( bottom layer of cards), does the > problem stay with the card? > > do the 3 related ports work? (grouped as 1-2-3-4 / 5-6-7-8 / 9-10-11-12 > / 13-14-15-16) > > -l > > Michael Duffy wrote: >> Hi all >> >> I have a kxtd 1232 with one extension not working jack number 10. The >> digital pair is dead as the slt extension is working, is there anyway I can >> repair or fix this extension. >> >> Regards >> Michael >> Sent from my BlackBerry® wireless handheld >> _________________________________________________________________ >> KX-T Mailing list --- http://kxthelp.com/ >> Subscription changes: http://kxthelp.com/mailman/listinfo/kxt >> >> > > > _________________________________________________________________ > KX-T Mailing list --- http://kxthelp.com/ > Subscription changes: http://kxthelp.com/mailman/listinfo/kxt > _________________________________________________________________ KX-T Mailing list --- http://kxthelp.com/ Subscription changes: http://kxthelp.com/mailman/listinfo/kxt
