Unnamed Administration sources reported that Marc L. Kozam said:
>
>
>
>
> Right now, you have one CO line set DIL 1:1 to extension 216. When it is
> busy, a second call gets a busy signal from the CO and the Panasonic system
> has no way to know that there is even a second all coming in.
Ahh, but it does....
> Your solution of using CFB/NA would only work for FAXes sent from another
> extension.
>
> You need a second CO, put made into a hunt group, with the first.
A) Case #1. The dedicated box is down. Its memory is full.
It's been unplugged or... In an case, it's not answering the
phone.
B) Case #2: The autoattendent has detected CPC tone, and sent the
call to 216. In this case, I think the VM will divert the call to
the 2nd fax ext. But what's not clear is what happens when someone
has chosen "To send a fax, dial 6" and 216 is busy/na....
--
A host is a host from coast to [EMAIL PROTECTED]
& no one will talk to a host that's close........[v].(301) 56-LINUX
Unless the host (that isn't close).........................pob 1433
is busy, hung or dead....................................20915-1433
*********************************************************
* To unsubscribe, e-mail [EMAIL PROTECTED] *
* The KXT-Digest Home Page: http://kxthelp.com/ *
*********************************************************
