Hi, I solved the problem two days ago. Like my controller is on a separate network, I have to configure OpenvSwitch in out-of-band mode.
Best regards Le 06/06/2018 à 09:49, Evan Zeller a écrit : > Can you share the rest of your dump-flows output or your flow > configuration (from inventory)? With proactive-flood-mode enabled > there should be a flow installed for each openflow enabled port which > forwards to all other openflow enabled ports on said device. > > If your goal is performance testing I would suggest you use directly > the openflowplugin project and generate your flows by hand or via > external script. At this point the l2switch project exists mostly for > education/introductory purposes and your results may not be truly > indicative of a real OpenFlow deployment in which flood-mode would > most definitely not be used. > > Evan > > On Sun, May 27, 2018 at 1:29 PM, krakydark <[email protected] > <mailto:[email protected]>> wrote: > > Hi, > > My goal is to experiment the last version of OpendayLight in order > to manage 4 OpenVSwitch (OVS) and more than 50 VM connected on > each OVS. So, I will analyze the performance of Opendaylight with > more than 200 VM in a first step. > > My problem is the following. One VM is a DHCP server and it > received all DHCP request of each VM but the OVS drop all DHCP > answer : > > sudo ovs-appctl bridge/dump-flows OF1 > .... > table_id=254, duration=725s, n_packets=1544, n_bytes=458176, > priority=0,reg0=0x2,actions=drop > ... > > If I shutdown the controller, each VM receives an IP and when I > start the controller again, with the same configuration, all flows > are installed correctly because each VM has an IP. If I set an IP > manually on a VM, I can ping without any problem the DHCP server. > The problem seems to be the DHCP packet. I use Opendaylight with > the feature odl-l2switch-switch-ui installed (and so also the > odl-l2switch-switch). I configured the following file : > > etc/opendaylight/datastore/initial/config/l2switch-config_l2switch-config.xml > > <?xml version="1.0" encoding="UTF-8"?> > <l2switch-config xmlns="urn:opendaylight:l2switch:l2switch-config"> > <is-install-dropall-flow>false</is-install-dropall-flow> > </l2switch-config> > > and arp-handler-config_arp-handler-config.xml > > <?xml version="1.0" encoding="UTF-8"?> > <arp-handler-config > xmlns="urn:opendaylight:packet:arp-handler-config"> > <is-proactive-flood-mode>true</is-proactive-flood-mode> > </arp-handler-config> > > It is possible to test with only 2 VM, one DHCP server and one > DHCP client on the same OVS. > > I'm on this problem from 2 weeks and I don't find a solution ! > > Thanks > Best regards > > _______________________________________________ > L2switch-dev mailing list > [email protected] > <mailto:[email protected]> > https://lists.opendaylight.org/mailman/listinfo/l2switch-dev > <https://lists.opendaylight.org/mailman/listinfo/l2switch-dev> > >
_______________________________________________ L2switch-dev mailing list [email protected] https://lists.opendaylight.org/mailman/listinfo/l2switch-dev
