Also, this is what my win2k says: error 732: Your computer or remote computer cannot accept control protocol PPP.
thx. On Wed, 3 Dec 2003 16:04:37 +0100 Stephane DESMET <[EMAIL PROTECTED]> wrote: > Hello, > > I have some troubles makging an l2tp connection between win2k and > freesWAN/l2tpd. > The IPsec connection seem to be okay, SA established. > The problem comes with the ppp daemon. > the error I have is : > peer closing for reason 3 (Control channel already exists) > > One strange thing is "auth" in the pppd command line, even if I have > noauth in options.l2tpd > > I don't understand what is the "ip range" field in the l2tpd.conf. > If I remove this field, I have peer closing connection for reason 1. > > I have joined my l2tpd log, l2tpd.conf and options.l2tpd . > > Could anybody help me ? > Thank you very much for any answer. > > Best regards. > > -- > Stephane DESMET > Responsable produits de sécurité > All Computing SAS > 17, rue du Colisée - 75008 Paris > France > (+33)1 49 53 90 36 > (+33)6 88 82 55 87 > internet: www.allcomputing.fr > > > > #> l2tpd -D > This binary does not support kernel L2TP. > l2tpd version 0.69 started on barrikaad PID:3042 > Written by Mark Spencer, Copyright (C) 1998, Adtran, Inc. > Forked by Scott Balmos and David Stipp, (C) 2001 > Inhereted by Jeff McAdams, (C) 2002 > Linux version 2.4.19-grsec-2 on a i686, port 1701 > ourtid = 24419, entropy_buf = 5f63 > check_control: control, cid = 0, Ns = 0, Nr = 0 > handle_avps: handling avp's for tunnel 24419, call 0 > message_type_avp: message type 1 (Start-Control-Connection-Request) > protocol_version_avp: peer is using version 1, revision 0. > framing_caps_avp: supported peer frames: sync > bearer_caps_avp: supported peer bearers: > firmware_rev_avp: peer reports firmware version 1280 (0x0500) > hostname_avp: peer reports hostname 'westeban' > vendor_avp: peer reports vendor 'Microsoft_' > assigned_tunnel_avp: using peer's tunnel 11 > receive_window_size_avp: peer wants RWS of 8. Will use flow control. > check_control: control, cid = 0, Ns = 1, Nr = 1 > handle_avps: handling avp's for tunnel 24419, call 0 > message_type_avp: message type 3 (Start-Control-Connection-Connected) > control_finish: Connection established to 10.1.10.58, 1701. Local: 24419, Remote: > 11. LNS session is 'barricade' > check_control: control, cid = 0, Ns = 2, Nr = 1 > handle_avps: handling avp's for tunnel 24419, call 0 > message_type_avp: message type 10 (Incoming-Call-Request) > message_type_avp: new incoming call > ourcid = 7323, entropy_buf = 1c9b > assigned_call_avp: using peer's call 1 > call_serno_avp: serial number is 0 > bearer_type_avp: peer bears: analog > check_control: control, cid = 0, Ns = 3, Nr = 1 > check_control: control, cid = 1, Ns = 3, Nr = 2 > handle_avps: handling avp's for tunnel 24419, call 7323 > message_type_avp: message type 12 (Incoming-Call-Connected) > tx_speed_avp: transmit baud rate is 10000000 > frame_type_avp: peer uses:sync frames > ignore_avp : Ignoring AVP > start_pppd: I'm running: "/usr/sbin/pppd" "passive" "-detach" > "10.1.30.254:10.0.0.1" "auth" "name" "Barricade" "file" "/etc/ppp/options.l2tpd" > control_finish: Call established with 10.1.10.58, Local: 7323, Remote: 1, Serial: 0 > check_control: control, cid = 0, Ns = 4, Nr = 2 > check_control: control, cid = 1, Ns = 4, Nr = 2 > handle_avps: handling avp's for tunnel 24419, call 7323 > message_type_avp: message type 14 (Call-Disconnect-Notify) > result_code_avp: peer closing for reason 3 (Control channel already exists), error = > 0 () > assigned_call_avp: using peer's call 1 > control_finish: Connection closed to 10.1.10.58, serial 0 () > check_control: control, cid = 0, Ns = 5, Nr = 2 > handle_avps: handling avp's for tunnel 24419, call 0 > message_type_avp: message type 4 (Stop-Control-Connection-Notification) > assigned_tunnel_avp: using peer's tunnel 11 > result_code_avp: peer closing for reason 6 (Requester is being shut down), error = 0 > () > control_finish: Connection closed to 10.1.10.58, port 1701 (), Local: 24419, Remote: > 11 > death_handler: Fatal signal 2 received > > > l2tpd.conf: > [global] > port = 1701 > access control = no > > [lns barricade] > name = Barricade > require authentication = yes > pppoptfile = /etc/ppp/options.l2tpd > ppp debug = no > flow bit = yes > lac = 0.0.0.1 - 223.255.255.255 > local ip = 10.1.30.254 > ip range = 10.0.0.1 - 10.0.0.254 > __END__ > > > /etc/ppp/options.l2tpd: > noauth > nomagic > __END__ > > > My test network is : > > LAN(10.1.30.0/24)----(10.1.30.254)FreeSWAN/l2tpd(10.1.10.50)---------win2k > roadwarrior(10.1.10.58) > > -- Stephane DESMET Responsable produits de sécurité All Computing SAS 17, rue du Colisée - 75008 Paris France (+33)1 49 53 90 36 (+33)6 88 82 55 87 internet: www.allcomputing.fr
