On Wed Nov 15, 2006 at 20:55:00 +0800, chenggh wrote: > On Wednesday 15 November 2006 20:18, chenggh wrote: > > On Wednesday 15 November 2006 18:20, Christian Helmuth wrote: > > > Hi, > > > > Here is my L4Linux booting log, Please look at it to help me. thank you.
First, please try to do what Christian suggested: Try your setup _without_ L4Linux, this helps to identify if L4Linux is the culprit or not. Second thing, if you do not see any more output from Linux in the log (via serial or in the terminal you run Fiasco-UX in) and your output device (e.g. framebuffer) does not come up for some reason, like in your current example, enable CONFIG_L4_SERIAL and CONFIG_L4_SERIAL_CONSOLE. Then add console=ttyLv0 to your kernel command line. With this Linux should print the boot up in minicom or xterm (Fiasco-UX). Adam -- Adam [EMAIL PROTECTED] Lackorzynski http://os.inf.tu-dresden.de/~adam/ _______________________________________________ l4-hackers mailing list [email protected] http://os.inf.tu-dresden.de/mailman/listinfo/l4-hackers
