Adam, I did another ham sync, rebuilt fiasco, rebuilt l4, rebuilt my natives, and it's a little better? Now the VMs crash, but at least the system keeps running and I can seem my natives printing even after both VMs are halted. So at least the whole system doesn't crash any more. Just the VMs.
Again, yes, Debian Linux on QEMU with kvm and six cores. Cores 0 and 1 are for L4 and natives, cores 2 and 3 are for vm1, cores 4 and 5 are for vm2. Please see attached! Richard -----Original Message----- From: Adam Lackorzynski <[email protected]> Sent: Sunday, May 4, 2025 11:11 AM To: Richard Clark <[email protected]>; [email protected] Cc: Bud Wykoff <[email protected]>; Douglas Schafer <[email protected]> Subject: Re: Upgrade issues. VM won't start. Richard, is that setup running on Linux QEMU+KVM? If yes, we recently (really a few days ago) fixed an issue in this virtualized setup (wrt to performance counter handling). It's on GH since Friday I believe. Otherwise please provide me you fiasco binary, such that I can look up fffffffff006a176 as this will point to the location that triggered the issue. Thanks, Adam On Sun May 04, 2025 at 13:14:00 +0000, Richard Clark wrote: > Adam, > > So I have been using version 23.10.1, built as per the download page, > and have gotten a couple VMs to ping eachother and give me a login > prompt. I finally realized I was missing the virtio_switch package and > grabbed it from github and put it where it is supposed to go. Of > course, being a version mismatch now, it did not compile. I decide to > bite the bullet and do an upgrade (always a mistake) and use the new > build process given with the new website. That went smoothly! I > install ham, run it, etc, everything builds, I update my local scripts and > links to use the new environment variables instead of being hardcoded, and it > all builds and looks good. Except that it doesn't run. The VMs get a memory > exception and kick into jdb. > > I have not changed any of my .cfg or .list files. The VMs and ramdisks are > untouched. > My local (L4 native) processes start and appear to run. But the VMs crash for > some reason. > Even the device tree is unchanged. I also tried a newly built linux (as > opposed to a prebuilt) and that failed as well. > > Is there some reason for this new crash between version 23.10.1 and the > latest version from github? > I've attached the VM startup output from both the old and new runs so you can > take a look. > > I'm so close... I see the IP configuration parameter and how to set up lwip > and virtio_switch.... > Then my natives should be able to talk directly to my linuxes. > > > Your help is greatly appreciated! > > > Richard > > vm1 | VMM: Created VCPU 0 @ 17000 > vm1 | VMM[vmbus]: 'vbus' capability not found. Hardware access not > possible for VM. > vm1 | VMM[main]: Hello out there. > vm1 | VMM[ASM]: Sys Info: > vm1 | vBus: 0 > vm1 | DMA devs: 0 > vm1 | IO-MMU: 0 > vm1 | Identity forced: 0 > vm1 | DMA phys addr: 0 > vm1 | DT dma-ranges: 0 > vm1 | VMM[ASM]: Operating mode: No DMA > vm1 | VMM[ram]: RAM not set up for DMA. > vm2 | VMM: Created VCPU 0 @ 17000 > vm2 | VMM[vmbus]: 'vbus' capability not found. Hardware access not > possible for VM. > vm2 | VMM[main]: Hello out there. > vm2 | VMM[ASM]: Sys Info: > vm2 | vBus: 0 > vm2 | DMA devs: 0 > vm2 | IO-MMU: 0 > vm2 | Identity forced: 0 > vm1 | VMM[ram]: RAM: @ 0x0 size=0x20000000 > vm2 | DMA phys addr: 0 > vm1 | VMM[ram]: RAM: VMM local mapping @ 0x1000000 > vm2 | DT dma-ranges: 0 > vm1 | VMM[ram]: RAM: VM offset=0x1000000 > vm2 | VMM[ASM]: Operating mode: No DMA > vm1 | VMM[main]: Loading kernel... > vm2 | VMM[ram]: RAM not set up for DMA. > vm1 | VMM[loader]: Linux kernel detected > vm1 | VMM[file]: load: @ 0xfc400 > vm1 | VMM[file]: copy in: to offset 0xfc400-0xba989f > vm1 | VMM[main]: Loading ram disk... > vm1 | VMM[ram]: load: rom/ramdisk1-amd64.rd -> 0x1fc00000 > vm1 | VMM[file]: load: @ 0x1fc00000 > vm1 | VMM[file]: copy in: to offset 0x1fc00000-0x1fffffff > vm1 | VMM[main]: Loaded ramdisk image rom/ramdisk1-amd64.rd to 1fc00000 > (size: 00400000) > vm1 | VMM[PIC]: Hello, Legacy_pic > vm2 | VMM[ram]: RAM: @ 0x0 size=0x20000000 > vm2 | VMM[ram]: RAM: VMM local mapping @ 0x1000000 > vm2 | VMM[ram]: RAM: VM offset=0x1000000 > vm2 | VMM[main]: Loading kernel... > vm1 | VMM: acpi_platform: Failed to get property 'l4vmm,pwrinput': > FDT_ERR_NOTFOUND > vm2 | VMM[loader]: Linux kernel detected > vm1 | VMM: Creating Acpi_platform > vm2 | VMM[file]: load: @ 0xfc400 > vm2 | VMM[file]: copy in: to offset 0xfc400-0xba989f > vm1 | VMM[ACPI]: Acpi timer @ 0xb008 > vm1 | VMM[RTC]: Hello from RTC. Irq=8 > vm2 | VMM[main]: Loading ram disk... > vm1 | VMM[uart_8250]: Create virtual 8250 console > vm2 | VMM[ram]: load: rom/ramdisk2-amd64.rd -> 0x1fc00000 > vm2 | VMM[file]: load: @ 0x1fc00000 > vm2 | VMM[file]: copy in: to offset 0x1fc00000-0x1fffffff > vm2 | VMM[main]: Loaded ramdisk image rom/ramdisk2-amd64.rd to 1fc00000 > (size: 00400000) > vm1 | VMM: l4rtc.l4vmm,rtccap: capability rtc is invalid. > vm1 | VMM[RTC]: l4vmm,rtccap not valid. Will not have wallclock time. > vm1 | VMM[vm]: Device creation for virtual device l4rtc failed. Disabling > device. > vm1 | VMM: isa_debugport.l4vmm,vcon_cap: capability debug is invalid. > vm1 | VMM[vm]: Device creation for virtual device isa_debugport failed. > Disabling device. > vm2 | VMM[PIC]: Hello, Legacy_pic > vm1 | VMM[PCI bus]: Creating host bridge > vm1 | VMM[Pci_window_alloc]: Init PCI window with range [0x6000, 0xffff > IO] > vm1 | VMM[Pci_window_alloc]: Init PCI window with range [0xaa000000, > 0xaaffffff MMIO32] > vm1 | VMM[Pci_window_alloc]: Init PCI window with range [0x300000000, > 0x3ffffffff MMIO64] > vm1 | VMM[PCI bus]: Registering PCI device 00:00.0 > vm2 | VMM: acpi_platform: Failed to get property 'l4vmm,pwrinput': > FDT_ERR_NOTFOUND > vm2 | VMM: Creating Acpi_platform > vm1 | VMM[guest]: New mmio mapping: @ b0000000 10000000 > vm1 | VMM[PCI bus]: Created & Registered the PCI host bridge > vm2 | VMM[ACPI]: Acpi timer @ 0xb008 > vm2 | VMM[RTC]: Hello from RTC. Irq=8 > vm1 | VMM[VIO Cons]: Create virtual PCI console > vm2 | VMM[uart_8250]: Create virtual 8250 console > vm1 | VMM[Pci_bridge_windows]: [MMIO32] allocated [0xaa000000, 0xaa001fff] > vm1 | VMM[Virt PCI dev]: bar[0] addr=0x0 size=0x2000 type=mmio32 > (non-prefetchable) > vm1 | VMM[Pci_bridge_windows]: [IO] allocated [0x6000, 0x607f] > vm1 | VMM[Virt PCI dev]: bar[1] addr=0x0 size=0x80 type=io > vm2 | VMM: l4rtc.l4vmm,rtccap: capability rtc is invalid. > vm2 | VMM[RTC]: l4vmm,rtccap not valid. Will not have wallclock time. > vm1 | VMM[PCI bus]: Registering PCI device 00:01.0 > vm2 | VMM[vm]: Device creation for virtual device l4rtc failed. Disabling > device. > vm1 | VMM[VIO Cons]: Console: 0x186b0 > vm1 | VMM[VIO proxy]: Creating proxy > vm2 | VMM: isa_debugport.l4vmm,vcon_cap: capability debug is invalid. > vm2 | VMM[vm]: Device creation for virtual device isa_debugport failed. > Disabling device. > vm1 | VMM[Pci_bridge_windows]: [MMIO32] allocated [0xaa002000, 0xaa003fff] > vm1 | VMM[Virt PCI dev]: bar[0] addr=0x0 size=0x2000 type=mmio32 > (non-prefetchable) > vm1 | VMM[Pci_bridge_windows]: [IO] allocated [0x6080, 0x60ff] > vm1 | VMM[Virt PCI dev]: bar[1] addr=0x0 size=0x80 type=io > p2p | Registering dataspace from 0x0 with 524288 KiB, offset 0x0 > p2p | PORT[0x15d70]: DMA guest [0-1fffffff] local [600000-205fffff] > offset 0 > vm2 | VMM[PCI bus]: Creating host bridge > p2p | register client: host IRQ: 420010 config DS: 41d000 > vm2 | VMM[Pci_window_alloc]: Init PCI window with range [0x6000, 0xffff > IO] > vm2 | VMM[Pci_window_alloc]: Init PCI window with range [0xaa000000, > 0xaaffffff MMIO32] > vm2 | VMM[Pci_window_alloc]: Init PCI window with range [0x300000000, > 0x3ffffffff MMIO64] > vm2 | VMM[PCI bus]: Registering PCI device 00:00.0 > vm1 | VMM[PCI bus]: Registering PCI device 00:02.0 > vm1 | VMM[VIO proxy]: Creating proxy > vm1 | VMM: [email protected],virtiocap: capability qdrv is invalid. > vm1 | VMM[vm]: Device creation for virtual device virtio_disk@2 failed. > Disabling device. > vm2 | VMM[guest]: New mmio mapping: @ b0000000 10000000 > vm1 | VMM: [email protected],dscap: capability bios_code is invalid. > vm2 | VMM[PCI bus]: Created & Registered the PCI host bridge > vm1 | VMM[ROM]: Missing 'l4vmm,dscap' property! > vm1 | VMM[vm]: Device creation for virtual device rom@ffc84000 failed. > Disabling device. > vm2 | VMM[VIO Cons]: Create virtual PCI console > vm1 | VMM: [email protected],dscap: capability bios_vars is invalid. > vm1 | VMM[CFI]: Missing 'l4vmm,dscap' property! > vm1 | VMM[vm]: Device creation for virtual device nvm@ffc00000 failed. > Disabling device. > vm2 | VMM[Pci_bridge_windows]: [MMIO32] allocated [0xaa000000, 0xaa001fff] > vm2 | VMM[Virt PCI dev]: bar[0] addr=0x0 size=0x2000 type=mmio32 > (non-prefetchable) > vm2 | VMM[Pci_bridge_windows]: [IO] allocated [0x6000, 0x607f] > vm2 | VMM[Virt PCI dev]: bar[1] addr=0x0 size=0x80 type=io > vm2 | VMM[PCI bus]: Registering PCI device 00:01.0 > vm1 | VMM: Created VCPU 1 @ 23000 > vm2 | VMM[VIO Cons]: Console: 0x186b0 > vm1 | VMM[ram]: Cleaning caches for device tree [20bfe000-20bffb80] > ([1fbfe000]) > vm2 | VMM[VIO proxy]: Creating proxy > vm1 | VMM: reschedule(): Initiating cpu startup for cap 0x418000/core 0 > vm2 | VMM[Pci_bridge_windows]: [MMIO32] allocated [0xaa002000, 0xaa003fff] > vm2 | VMM[Virt PCI dev]: bar[0] addr=0x0 size=0x2000 type=mmio32 > (non-prefetchable) > vm2 | VMM[Pci_bridge_windows]: [IO] allocated [0x6080, 0x60ff] > vm2 | VMM[Virt PCI dev]: bar[1] addr=0x0 size=0x80 type=io > p2p | Registering dataspace from 0x0 with 524288 KiB, offset 0x0 > p2p | PORT[0x15e80]: DMA guest [0-1fffffff] local [20600000-405fffff] > offset 0 > p2p | register client: host IRQ: 420010 config DS: 41e000 > vm1 | VMM[ACPI]: Initialize legacy BIOS ACPI tables. > vm2 | VMM[PCI bus]: Registering PCI device 00:02.0 > vm1 | VMM: Zeropage @ 0x1000, Kernel @ 0xfc400 > vm2 | VMM[VIO proxy]: Creating proxy > vm1 | VMM: Cmd_line: console=hvc0 ramdisk_size=10000 root=/dev/ram0 rw > vm2 | VMM: [email protected],virtiocap: capability qdrv is invalid. > vm1 | VMM: cmdline check: console=hvc0 ramdisk_size=10000 root=/dev/ram0 > rw > vm2 | VMM[vm]: Device creation for virtual device virtio_disk@2 failed. > Disabling device. > vm1 | VMM[vmmap]: VM map: > vm1 | VMM[vmmap]: [ 0:1fffffff]: Ram > vm1 | VMM[vmmap]: [b0000000:bfffffff]: Pci_bus_cfg_ecam > vm2 | VMM: [email protected],dscap: capability bios_code is invalid. > vm1 | VMM[vmmap]: [fec00000:fec00fff]: Ioapic > vm2 | VMM[ROM]: Missing 'l4vmm,dscap' property! > vm1 | VMM[vmmap]: [fee00000:fee00fff]: Lapic_access_handler > vm2 | VMM[vm]: Device creation for virtual device rom@ffc84000 failed. > Disabling device. > vm1 | VMM[main]: Populating guest physical address space > vm1 | VMM[mmio]: Mapping [1000000 - 20ffffff] -> [0 - 1fffffff] > vm2 | VMM: [email protected],dscap: capability bios_vars is invalid. > vm1 | VMM[vmmap]: IOport map: > vm2 | VMM[CFI]: Missing 'l4vmm,dscap' property! > vm1 | VMM[vmmap]: [ 20: 21]: PIC > vm2 | VMM[vm]: Device creation for virtual device nvm@ffc00000 failed. > Disabling device. > vm1 | VMM[vmmap]: [ 40: 43]: PIT > vm1 | VMM[vmmap]: [ 61: 61]: PIT port 61 > vm1 | VMM[vmmap]: [ 70: 71]: RTC > vm1 | VMM[vmmap]: [ a0: a1]: PIC > vm1 | VMM[vmmap]: [ 3f8: 3ff]: UART 8250 > vm1 | VMM[vmmap]: [ 510: 51b]: Firmware interface > vm1 | VMM[vmmap]: [ cf8: cff]: PCI bus cfg > vm1 | VMM[vmmap]: [1800:1808]: ACPI platform > vm2 | VMM: Created VCPU 1 @ 23000 > vm1 | VMM[vmmap]: [b008:b008]: ACPI Timer > vm2 | VMM[ram]: Cleaning caches for device tree [20bfe000-20bffb80] > ([1fbfe000]) > vm1 | VMM[guest]: Starting VMM @ 0x100000 > vm2 | VMM: reschedule(): Initiating cpu startup for cap 0x418000/core 0 > vm1 | VMM[Cpu_dev]: [ 0] Reset called > vm1 | VMM[Cpu_dev]: [ 0] Resetting vCPU. > vm1 | VMM: Hello clock source for vCPU 0 > > --------------------------------------------------------------------- > > CPU 2 [fffffffff006a176]: General Protection (ERR=0000000000000000) > CPU(s) 0-5 entered JDB > jdb: >
Created vcon channel: vm1 [426010] cons> Created vcon channel: vm2 [427010] cons> vm1 | VMM: Created VCPU 0 @ 17000 vm1 | VMM[vmbus]: 'vbus' capability not found. Hardware access not possible for VM. vm1 | VMM[main]: Hello out there. vm1 | VMM[ASM]: Sys Info: vm1 | vBus: 0 vm1 | DMA devs: 0 vm1 | IO-MMU: 0 vm1 | Identity forced: 0 vm1 | DMA phys addr: 0 vm1 | DT dma-ranges: 0 vm1 | VMM[ASM]: Operating mode: No DMA vm1 | VMM[ram]: RAM not set up for DMA. vm2 | VMM: Created VCPU 0 @ 17000 vm2 | VMM[vmbus]: 'vbus' capability not found. Hardware access not possible for VM. vm2 | VMM[main]: Hello out there. vm1 | VMM[ram]: RAM: @ 0x0 size=0x20000000 vm1 | VMM[ram]: RAM: VMM local mapping @ 0x1000000 vm1 | VMM[ram]: RAM: VM offset=0x1000000 vm2 | VMM[ASM]: Sys Info: vm2 | vBus: 0 vm1 | VMM[main]: Loading kernel... vm2 | DMA devs: 0 vm2 | IO-MMU: 0 vm2 | Identity forced: 0 vm2 | DMA phys addr: 0 vm2 | DT dma-ranges: 0 vm2 | VMM[ASM]: Operating mode: No DMA vm1 | VMM[loader]: Elf image detected vm2 | VMM[ram]: RAM not set up for DMA. vm1 | VMM[bin]: Copy in ELF binary section @0x1000000 from 0x200000/0x18aef10 vm1 | VMM[bin]: Copy in ELF binary section @0x2a00000 from 0x1c00000/0x814000 vm1 | VMM[bin]: Copy in ELF binary section @0x3214000 from 0x2600000/0x2ece8 vm1 | VMM[bin]: Copy in ELF binary section @0x3243000 from 0x2643000/0x288000 vm1 | VMM[main]: Loading ram disk... vm1 | VMM[ram]: load: rom/ramdisk1-amd64.rd -> 0x1fc00000 vm1 | VMM[file]: load: @ 0x1fc00000 vm1 | VMM[file]: copy in: to offset 0x1fc00000-0x1fffffff vm1 | VMM[main]: Loaded ramdisk image rom/ramdisk1-amd64.rd to 1fc00000 (size: 00400000) vm2 | VMM[ram]: RAM: @ 0x0 size=0x20000000 vm2 | VMM[ram]: RAM: VMM local mapping @ 0x1000000 vm2 | VMM[ram]: RAM: VM offset=0x1000000 vm2 | VMM[main]: Loading kernel... vm1 | VMM[PIC]: Hello, Legacy_pic vm2 | VMM[loader]: Elf image detected vm2 | VMM[bin]: Copy in ELF binary section @0x1000000 from 0x200000/0x18aef10 vm2 | VMM[bin]: Copy in ELF binary section @0x2a00000 from 0x1c00000/0x814000 vm2 | VMM[bin]: Copy in ELF binary section @0x3214000 from 0x2600000/0x2ece8 vm2 | VMM[bin]: Copy in ELF binary section @0x3243000 from 0x2643000/0x288000 vm2 | VMM[main]: Loading ram disk... vm1 | VMM: acpi_platform: Failed to get property 'l4vmm,pwrinput': FDT_ERR_NOTFOUND vm2 | VMM[ram]: load: rom/ramdisk2-amd64.rd -> 0x1fc00000 vm2 | VMM[file]: load: @ 0x1fc00000 vm2 | VMM[file]: copy in: to offset 0x1fc00000-0x1fffffff vm1 | VMM: Creating Acpi_platform vm2 | VMM[main]: Loaded ramdisk image rom/ramdisk2-amd64.rd to 1fc00000 (size: 00400000) vm1 | VMM[ACPI]: Acpi timer @ 0xb008 vm1 | VMM[RTC]: Hello from RTC. Irq=8 vm1 | VMM[uart_8250]: Create virtual 8250 console vm1 | VMM: l4rtc.l4vmm,rtccap: capability rtc is invalid. vm1 | VMM[RTC]: l4vmm,rtccap not valid. Will not have wallclock time. vm2 | VMM[PIC]: Hello, Legacy_pic vm1 | VMM[vm]: Device creation for virtual device l4rtc failed. Disabling device. vm1 | VMM: isa_debugport.l4vmm,vcon_cap: capability debug is invalid. vm1 | VMM[vm]: Device creation for virtual device isa_debugport failed. Disabling device. vm2 | VMM: acpi_platform: Failed to get property 'l4vmm,pwrinput': FDT_ERR_NOTFOUND vm2 | VMM: Creating Acpi_platform vm1 | VMM[PCI bus]: Creating host bridge vm2 | VMM[ACPI]: Acpi timer @ 0xb008 vm1 | VMM[Pci_window_alloc]: Init PCI window with range [0x6000, 0xffff IO] vm1 | VMM[Pci_window_alloc]: Init PCI window with range [0xaa000000, 0xaaffffff MMIO32] vm2 | VMM[RTC]: Hello from RTC. Irq=8 vm1 | VMM[Pci_window_alloc]: Init PCI window with range [0x300000000, 0x3ffffffff MMIO64] vm2 | VMM[uart_8250]: Create virtual 8250 console vm1 | VMM[PCI bus]: Registering PCI device 00:00.0 vm1 | VMM[guest]: New mmio mapping: @ b0000000 10000000 vm1 | VMM[PCI bus]: Created & Registered the PCI host bridge vm1 | VMM[VIO Cons]: Create virtual PCI console vm2 | VMM: l4rtc.l4vmm,rtccap: capability rtc is invalid. vm2 | VMM[RTC]: l4vmm,rtccap not valid. Will not have wallclock time. vm2 | VMM[vm]: Device creation for virtual device l4rtc failed. Disabling device. vm2 | VMM: isa_debugport.l4vmm,vcon_cap: capability debug is invalid. vm2 | VMM[vm]: Device creation for virtual device isa_debugport failed. Disabling device. vm1 | VMM[Pci_bridge_windows]: [MMIO32] allocated [0xaa000000, 0xaa001fff] vm1 | VMM[Virt PCI dev]: bar[0] addr=0x0 size=0x2000 type=mmio32 (non-prefetchable) vm1 | VMM[Pci_bridge_windows]: [IO] allocated [0x6000, 0x607f] vm1 | VMM[Virt PCI dev]: bar[1] addr=0x0 size=0x80 type=io vm1 | VMM[PCI bus]: Registering PCI device 00:01.0 vm1 | VMM[VIO Cons]: Console: 0x186b0 vm1 | VMM[VIO proxy]: Creating proxy vm2 | VMM[PCI bus]: Creating host bridge vm1 | VMM[Pci_bridge_windows]: [MMIO32] allocated [0xaa002000, 0xaa003fff] vm1 | VMM[Virt PCI dev]: bar[0] addr=0x0 size=0x2000 type=mmio32 (non-prefetchable) vm1 | VMM[Pci_bridge_windows]: [IO] allocated [0x6080, 0x60ff] vm1 | VMM[Virt PCI dev]: bar[1] addr=0x0 size=0x80 type=io p2p | Registering dataspace from 0x0 with 524288 KiB, offset 0x0 vm2 | VMM[Pci_window_alloc]: Init PCI window with range [0x6000, 0xffff IO] vm2 | VMM[Pci_window_alloc]: Init PCI window with range [0xaa000000, 0xaaffffff MMIO32] vm2 | VMM[Pci_window_alloc]: Init PCI window with range [0x300000000, 0x3ffffffff MMIO64] p2p | PORT[0x15d70]: DMA guest [0-1fffffff] local [600000-205fffff] offset 0 vm2 | VMM[PCI bus]: Registering PCI device 00:00.0 vm2 | VMM[guest]: New mmio mapping: @ b0000000 10000000 vm2 | VMM[PCI bus]: Created & Registered the PCI host bridge p2p | register client: host IRQ: 420010 config DS: 41d000 vm2 | VMM[VIO Cons]: Create virtual PCI console vm1 | VMM[PCI bus]: Registering PCI device 00:02.0 vm1 | VMM[VIO proxy]: Creating proxy vm1 | VMM: [email protected],virtiocap: capability qdrv is invalid. vm1 | VMM[vm]: Device creation for virtual device virtio_disk@2 failed. Disabling device. vm2 | VMM[Pci_bridge_windows]: [MMIO32] allocated [0xaa000000, 0xaa001fff] vm2 | VMM[Virt PCI dev]: bar[0] addr=0x0 size=0x2000 type=mmio32 (non-prefetchable) vm2 | VMM[Pci_bridge_windows]: [IO] allocated [0x6000, 0x607f] vm1 | VMM: [email protected],dscap: capability bios_code is invalid. vm2 | VMM[Virt PCI dev]: bar[1] addr=0x0 size=0x80 type=io vm1 | VMM[ROM]: Missing 'l4vmm,dscap' property! vm1 | VMM[vm]: Device creation for virtual device rom@ffc84000 failed. Disabling device. vm2 | VMM[PCI bus]: Registering PCI device 00:01.0 vm2 | VMM[VIO Cons]: Console: 0x186b0 vm1 | VMM: [email protected],dscap: capability bios_vars is invalid. vm1 | VMM[CFI]: Missing 'l4vmm,dscap' property! vm1 | VMM[vm]: Device creation for virtual device nvm@ffc00000 failed. Disabling device. vm2 | VMM[VIO proxy]: Creating proxy vm2 | VMM[Pci_bridge_windows]: [MMIO32] allocated [0xaa002000, 0xaa003fff] vm2 | VMM[Virt PCI dev]: bar[0] addr=0x0 size=0x2000 type=mmio32 (non-prefetchable) vm2 | VMM[Pci_bridge_windows]: [IO] allocated [0x6080, 0x60ff] vm2 | VMM[Virt PCI dev]: bar[1] addr=0x0 size=0x80 type=io p2p | Registering dataspace from 0x0 with 524288 KiB, offset 0x0 vm1 | VMM: Created VCPU 1 @ 23000 vm1 | VMM[ram]: Cleaning caches for device tree [20bfe000-20bffb80] ([1fbfe000]) vm1 | VMM: reschedule(): Initiating cpu startup for cap 0x418000/core 0 p2p | PORT[0x15e80]: DMA guest [0-1fffffff] local [20600000-405fffff] offset 0 p2p | register client: host IRQ: 420010 config DS: 41e000 vm2 | VMM[PCI bus]: Registering PCI device 00:02.0 vm2 | VMM[VIO proxy]: Creating proxy vm2 | VMM: [email protected],virtiocap: capability qdrv is invalid. vm2 | VMM[vm]: Device creation for virtual device virtio_disk@2 failed. Disabling device. vm2 | VMM: [email protected],dscap: capability bios_code is invalid. vm2 | VMM[ROM]: Missing 'l4vmm,dscap' property! vm2 | VMM[vm]: Device creation for virtual device rom@ffc84000 failed. Disabling device. vm2 | VMM: [email protected],dscap: capability bios_vars is invalid. vm2 | VMM[CFI]: Missing 'l4vmm,dscap' property! vm2 | VMM[vm]: Device creation for virtual device nvm@ffc00000 failed. Disabling device. vm1 | VMM[ACPI]: Initialize legacy BIOS ACPI tables. vm1 | VMM: Zeropage @ 0x1000, Kernel @ 0x1000000 vm1 | VMM: Cmd_line: console=hvc0 ramdisk_size=10000 root=/dev/ram0 rw vm2 | VMM: Created VCPU 1 @ 23000 vm1 | VMM: Elf guest zeropage: dtb 0x1fbfdff0, entry 0x1000000 vm2 | VMM[ram]: Cleaning caches for device tree [20bfe000-20bffb80] ([1fbfe000]) vm1 | VMM: cmdline check: console=hvc0 ramdisk_size=10000 root=/dev/ram0 rw vm2 | VMM: reschedule(): Initiating cpu startup for cap 0x418000/core 0 vm1 | VMM[vmmap]: VM map: vm1 | VMM[vmmap]: [ 0:1fffffff]: Ram vm1 | VMM[vmmap]: [b0000000:bfffffff]: Pci_bus_cfg_ecam vm1 | VMM[vmmap]: [fec00000:fec00fff]: Ioapic vm1 | VMM[vmmap]: [fee00000:fee00fff]: Lapic_access_handler vm1 | VMM[main]: Populating guest physical address space vm1 | VMM[mmio]: Mapping [1000000 - 20ffffff] -> [0 - 1fffffff] vm1 | VMM[vmmap]: IOport map: vm1 | VMM[vmmap]: [ 20: 21]: PIC vm1 | VMM[vmmap]: [ 40: 43]: PIT vm1 | VMM[vmmap]: [ 61: 61]: PIT port 61 vm1 | VMM[vmmap]: [ 70: 71]: RTC vm1 | VMM[vmmap]: [ a0: a1]: PIC vm1 | VMM[vmmap]: [ 3f8: 3ff]: UART 8250 vm1 | VMM[vmmap]: [ 510: 51b]: Firmware interface vm1 | VMM[vmmap]: [ cf8: cff]: PCI bus cfg vm1 | VMM[vmmap]: [1800:1808]: ACPI platform vm1 | VMM[vmmap]: [b008:b008]: ACPI Timer vm1 | VMM[guest]: Starting VMM @ 0x1000000 vm1 | VMM[Cpu_dev]: [ 0] Reset called vm1 | VMM[Cpu_dev]: [ 0] Resetting vCPU. vm2 | VMM[ACPI]: Initialize legacy BIOS ACPI tables. vm2 | VMM: Zeropage @ 0x1000, Kernel @ 0x1000000 vm2 | VMM: Cmd_line: console=hvc0 ramdisk_size=10000 root=/dev/ram0 rw vm2 | VMM: Elf guest zeropage: dtb 0x1fbfdff0, entry 0x1000000 vm1 | VMM: Hello clock source for vCPU 0 vm2 | VMM: cmdline check: console=hvc0 ramdisk_size=10000 root=/dev/ram0 rw vm2 | VMM[vmmap]: VM map: vm2 | VMM[vmmap]: [ 0:1fffffff]: Ram vm2 | VMM[vmmap]: [b0000000:bfffffff]: Pci_bus_cfg_ecam vm2 | VMM[vmmap]: [fec00000:fec00fff]: Ioapic vm2 | VMM[vmmap]: [fee00000:fee00fff]: Lapic_access_handler vm2 | VMM[main]: Populating guest physical address space vm2 | VMM[mmio]: Mapping [1000000 - 20ffffff] -> [0 - 1fffffff] vm2 | VMM[vmmap]: IOport map: vm2 | VMM[vmmap]: [ 20: 21]: PIC vm1 | VMM: VM-entry failure due to invalid guest state: vm1 | Exit reason raw: 0x80000021 vm1 | Exit qualification: 0x0 vm2 | VMM[vmmap]: [ 40: 43]: PIT vm1 | IP: 0x100001e vm2 | VMM[vmmap]: [ 61: 61]: PIT port 61 vm1 | Instruction error: 0x0 vm2 | VMM[vmmap]: [ 70: 71]: RTC vm1 | Entry exception error: 0x0 vm2 | VMM[vmmap]: [ a0: a1]: PIC vm1 | VMM: [ 0]: Exit at guest IP 0x100001e SP 0x1a03f4e with 0x80000021 (Qual: 0x0) vm1 | VMM: [ 0]: Unhandled exit reason: VM-entry failure due to invalid guest state (33) vm1 | VMM: FATAL: [ 0]: Failure in VMM -38 vm2 | VMM[vmmap]: [ 3f8: 3ff]: UART 8250 vm1 | VMM: FATAL: [ 0] RAX 0x2213fe9 vm2 | VMM[vmmap]: [ 510: 51b]: Firmware interface vm1 | RBX 0x0 vm2 | VMM[vmmap]: [ cf8: cff]: PCI bus cfg vm1 | RCX 0xc0000101 vm2 | VMM[vmmap]: [1800:1808]: ACPI platform vm1 | RDX 0x2213fea vm2 | VMM[vmmap]: [b008:b008]: ACPI Timer vm1 | RSI 0x1000 vm2 | VMM[guest]: Starting VMM @ 0x1000000 vm1 | RDI 0x1000 vm2 | VMM[Cpu_dev]: [ 0] Reset called vm1 | RSP 0x0 vm2 | VMM[Cpu_dev]: [ 0] Resetting vCPU. vm1 | RBP 0x0 vm1 | R8 0x0 vm1 | R9 0x0 vm1 | R10 0x0 vm1 | R11 0x0 vm1 | R12 0x0 vm1 | R13 0x0 vm1 | R14 0x0 vm1 | R15 0x0 vm1 | RIP 0x100001e vm1 | vCPU RIP 0x1000000 vm1 | VMM: FATAL: [ 0] VM instruction error: 0x0 vm1 | VMM: FATAL: VM entered a fatal state. Halting. vm2 | VMM: Hello clock source for vCPU 0 vm2 | VMM: VM-entry failure due to invalid guest state: vm2 | Exit reason raw: 0x80000021 vm2 | Exit qualification: 0x0 vm2 | IP: 0x100001e vm2 | Instruction error: 0x0 vm2 | Entry exception error: 0x0 vm2 | VMM: [ 0]: Exit at guest IP 0x100001e SP 0x1a03f4e with 0x80000021 (Qual: 0x0) vm2 | VMM: [ 0]: Unhandled exit reason: VM-entry failure due to invalid guest state (33) vm2 | VMM: FATAL: [ 0]: Failure in VMM -38 vm2 | VMM: FATAL: [ 0] RAX 0x2213fe9 vm2 | RBX 0x0 vm2 | RCX 0xc0000101 vm2 | RDX 0x2213fea vm2 | RSI 0x1000 vm2 | RDI 0x1000 vm2 | RSP 0x0 vm2 | RBP 0x0 vm2 | R8 0x0 vm2 | R9 0x0 vm2 | R10 0x0 vm2 | R11 0x0 vm2 | R12 0x0 vm2 | R13 0x0 vm2 | R14 0x0 vm2 | R15 0x0 vm2 | RIP 0x100001e vm2 | vCPU RIP 0x1000000 vm2 | VMM: FATAL: [ 0] VM instruction error: 0x0 vm2 | VMM: FATAL: VM entered a fatal state. Halting.
_______________________________________________ l4-hackers mailing list -- [email protected] To unsubscribe send an email to [email protected]
