On Aug 3, 2004, at 17:39, Weronika Patena wrote:

One of my bobbins broke recently [...]
The break is in the neck (where the thread is).  If I glue
it together, will it be usable,

Properly made necks are slender, and will break occasionally; it's a fact of life :) Necks can, also, break even under every-day conditions (while winding, for example); you've extended the life of your existing bobbins by housing them in a roll, but... Unless it's an antique/collectible bobbin, I'd ditch it :)


If it's a hand-made, but modern one, you might notify the maker, and he/she might replace it, though I never liked to "call" on such promises, and let it go, or: cut the neck off, drill a hole in the body, stick a needle in it, and you have a divider pin. Worth doing if the body's pretty.

or will it do bad things to the thread?

The join's not likely to stay together long enough *to* do bad things to the thread... :) Unless you join it by bitting (drill a hole in both neck and body, stick a short piece of a pin/needle down both holes, push the broken pieces together along the metal "core", glue *both*along the shaft and the break), there just isn't enough of a surface for a solid join. 9 times out of 10, it's not worth the trouble.


If the bobbin has sentimental value (you got it from a friend or Secret Pal), you might want to glue it together, but don't use it; put it in a display case, or something that'll keep the join safe.

IMO...

---
Tamara P Duvall             http://lorien.emufarm.org/~tpd
Lexington, Virginia, USA     (Formerly of Warsaw, Poland)
              Healthy US through The No-CARB Diet:
    no C-heney, no A-shcroft, no R-umsfeld, no B-ush.

-
To unsubscribe send email to [EMAIL PROTECTED] containing the line:
unsubscribe lace [EMAIL PROTECTED] For help, write to
[EMAIL PROTECTED]

Reply via email to