Sherif F. Fahmy ??: > Hi Lin, > > Thanks a lot for the prompt reply. Unfortunately, my Solaris system is a > bare-bones system with no access to networking or other file systems in > read/write mode so I cannot copy verbatim the exact output of scanpci or > prtconf, however the device id reported is > > pci1a32:0303 > > and it is reported compatible with the pciex168c,002 Should it be pciex168c,002a? I guess this is not a complete vender/device id.
Please run "scanpci -v" and return me the vender/device id, because "pci1a32:0303" is not a regular Atheros vender/device combination, it should be something like "pciex168c,0xXXXX". BTW, could you tell me which kind of machine you are using? Thanks. Br, Lin > among other drivers in the output of prtconf under solaris. I do not know if > it will help, but here is the output of lshw -vvv under linux. > > 03:00.0 Network controller: Atheros Communications Inc. AR928X Wireless > Network Adapter (PCI-Express) (rev 01) > Subsystem: Device 1a32:0303 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 64 bytes > Interrupt: pin A routed to IRQ 17 > Region 0: Memory at f4600000 (64-bit, non-prefetchable) [size=64K] > Capabilities: [40] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2- AuxCurrent=375mA > PME(D0+,D1+,D2-,D3hot+,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [50] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 > Enable- > Address: 00000000 Data: 0000 > Capabilities: [60] Express (v1) Legacy Endpoint, MSI 00 > DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, > L1 <64us > ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset- > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- > Unsupported- > RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop- > MaxPayload 128 bytes, MaxReadReq 512 bytes > DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- > TransPend- > LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM unknown, Latency > L0 <512ns, L1 <64us > ClockPM- Suprise- LLActRep- BwNot- > LnkCtl: ASPM L1 Enabled; RCB 128 bytes Disabled- Retrain- > CommClk+ > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ > DLActive- BWMgmt- ABWMgmt- > Capabilities: [90] MSI-X: Enable- Mask- TabSize=1 > Vector table: BAR=0 offset=00000000 > PBA: BAR=0 offset=00000000 > Capabilities: [100] Advanced Error Reporting <?> > Capabilities: [140] Virtual Channel <?> > Capabilities: [160] Device Serial Number 00-00-00-00-00-00-00-00 > Kernel driver in use: ath9k > Kernel modules: ath9k > > > Once again, thanks for the help. >
