Checking with /usr/X11/bin/scanpci, if the chipset is Atheros 5007EG, then it's a known cr 6508851.
Regards, Judy Julian Hill On 03/02/08 03:31 wrote: > sorry, i pasted the wrong output in my earlier message. Trying to get the > ath driver to work on the Presario C751NR. Here's the correct prtconf info: > > Node 0x000015 > assigned-addresses: > 83010010.00000000.51300000.00000000.00010000 > reg: > 00010000.00000000.00000000.00000000.00000000.03010010.00000000.00000000.00000000.00010000 > compatible: 'pciex168c,1c.103c.137a.1' + > 'pciex168c,1c.103c.137a' + 'pciex168c,1c.1' + 'pciex168c,1c' + > 'pciexclass,020000' + 'pciexclass,0200' + 'pci168c,1c.103c.137a.1' + > 'pci168c,1c.103c.137a' + 'pci103c,137a' + 'pci168c,1c.1' + 'pci168c,1c' + > 'pciclass,020000' + 'pciclass,0200' > model: 'Ethernet controller' > power-consumption: 00000001.00000001 > devsel-speed: 00000000 > interrupts: 00000001 > subsystem-vendor-id: 0000103c > subsystem-id: 0000137a > unit-address: '0' > class-code: 00020000 > revision-id: 00000001 > vendor-id: 0000168c > device-id: 0000001c > pcie-capid-pointer: 00000060 > pcie-capid-reg: 00000011 > name: 'pci103c,137a' > > devfsadm reports that ath is loaded but failed to attach. Suggestions?
