It seems the driver is successfully attached. So what's not working?

Judy

Bernie Harris On 02/08/08 00:07 wrote:
> No it is NOT WORKING after upgrading from S10 11/06 to 8/07.  It was working 
> great with 11/06.  After setting ath:ath_dbg_flags=0xffffffff in /etc/system, 
> I don't see any messages other than
>
> Feb  7 10:50:19 ferrari unix: [ID 954099 kern.info] NOTICE: IRQ21 is being 
> share
> d by drivers with different interrupt levels.
> Feb  7 10:50:19 ferrari This may result in reduced system performance.
> Feb  7 10:50:19 ferrari genunix: [ID 678236 kern.info] Ethernet address = 
> 0:b:6b
> :4f:ac:f0
> Feb  7 10:50:19 ferrari gld: [ID 944156 kern.info] ath0: Atheros driver: type 
> "e
> ther" mac address 00:0b:6b:4f:ac:f0
> Feb  7 10:50:19 ferrari pci_pci: [ID 370704 kern.info] PCI-device: 
> pci185f,1012@
> 2, ath0
> Feb  7 10:50:19 ferrari genunix: [ID 936769 kern.info] ath0 is /pci at 
> 0,0/pci1002,
> 4371 at 14,4/pci185f,1012 at 2
>
> Note that I wasn't getting the "IRQ21 is being shared" message with 11/06 but 
> I understand that that message can ususally be ignored.  But just in case it 
> matters,
> IRQ  Vector IPL Bus   Type  CPU Share APIC/INT# ISR(s)
> 1    0x41   5   ISA   Fixed 0   1     0x0/0x1   i8042_intr
> 12   0x42   5   ISA   Fixed 0   1     0x0/0xc   i8042_intr
> 14   0x40   5   ISA   Fixed 0   1     0x0/0xe   ata_intr
> 15   0x43   5   ISA   Fixed 0   1     0x0/0xf   ata_intr
> 17   0x82   9   PCI   Fixed 0   1     0x0/0x11  oss_intr
> 18   0x61   6   PCI   Fixed 0   1     0x0/0x12  bcme_intr
> 19   0x20   1   PCI   Fixed 0   3     0x0/0x13  ohci_intr, ohci_intr, 
> ehci_intr
> 21   0x81   9   PCI   Fixed 0   3     0x0/0x15  gld_intr
> 23   0x60   6   PCI   Fixed 0   1     0x0/0x17  pcic_intr
> 208  0xd0   14        IPI   ALL 1     -         kcpc_hw_overflow_intr
> 209  0xd1   14        IPI   ALL 1     -         cbe_fire
> 240  0xe0   15        IPI   ALL 1     -         apic_error_intr
>
> I realize that if I really want wifi to work again I should move to one of 
> the OpenSolaris releases but it did work well (including wpa) under the older 
> S10 release.  If you know of anything else I can do to get it working under 
> S10 8/07, I would appreciate hearing about it.  Thanks.
>
> Bernie
>  
>  
> This message posted from opensolaris.org
> _______________________________________________
> laptop-discuss mailing list
> laptop-discuss at opensolaris.org
>
>   


Reply via email to