Thanks this is what I get - so I would have assumed that it would have loaded
a driver but the output from prtconf says "pci8086,2551 (driver not attached)"
- which presumably means exactly that it says. While the other "pci1014,522,
instance #0" does have one attached.
So - why is ipw not attaching to my device ? PS Nexenta seems to load the
driver - well the wifi light on the laptop starts blinking...
Thanks
Node 0x000017
assigned-addresses:
82021010.00000000.c0200000.00000000.00001000
reg:
00021000.00000000.00000000.00000000.00000000.02021010.00000000.00000000.00000000.00001000
compatible: 'pci8086,1043.8086.2551.4' +
'pci8086,1043.8086.2551' + 'pci8086,2551' + 'pci8086,1043.4' + 'pci8086,1043' +
'pciclass,028000' + 'pciclass,0280'
model: 'Network controller'
power-consumption: 00000001.00000001
fast-back-to-back:
devsel-speed: 00000001
interrupts: 00000001
max-latency: 00000022
min-grant: 00000002
subsystem-vendor-id: 00008086
subsystem-id: 00002551
unit-address: '2'
class-code: 00028000
revision-id: 00000004
vendor-id: 00008086
device-id: 00001043
name: 'pci8086,2551'
Node 0x000018
assigned-addresses:
82024010.00000000.c0201000.00000000.00001000.81024014.00000000.00008000.00000000.00000040
reg:
00024000.00000000.00000000.00000000.00000000.02024010.00000000.00000000.00000000.00001000.01024014.00000000.00000000.00000000.00000040
compatible: 'pci8086,103d.1014.522.81' +
'pci8086,103d.1014.522' + 'pci1014,522' + 'pci8086,103d.81' + 'pci8086,103d' +
'pciclass,020000' + 'pciclass,0200'
model: 'Ethernet controller'
power-consumption: 00000001.00000001
fast-back-to-back:
devsel-speed: 00000001
interrupts: 00000001
max-latency: 00000038
min-grant: 00000008
subsystem-vendor-id: 00001014
subsystem-id: 00000522
unit-address: '8'
class-code: 00020000
revision-id: 00000081
vendor-id: 00008086
device-id: 0000103d
name: 'pci1014,522'
This message posted from opensolaris.org
