I appreciate that! thanks!
Quaker Fang wrote:
> Hi Alexander,
>
> I find the root cause is the cache of your mini-PCI card is zero,
> see the output of "prtconf -v":
> -----------
> pci bus 0x0000 cardnum 0x05 function 0x00: vendor 0x1814 device 0x0201
> RaLink RT2500 802.11G Cardbus/mini-PCI
> CardVendor 0x1462 card 0x6833 (Micro-Star International Co., Ltd., Card
> unknown)
> STATUS 0x0410 COMMAND 0x0000
> CLASS 0x02 0x80 0x00 REVISION 0x01
> BIST 0x00 HEADER 0x00
> LATENCY 0x00 CACHE 0x00
> ^^^^ this cause the BAD TRAP: type=0 (#de Divide error)
>
> BASE0 0xffffe000 addr 0xffffe000 MEM
> MAX_LAT 0x00 MIN_GNT 0x00 INT_PIN 0x01 INT_LINE 0x00
> BYTE_0 0x01 BYTE_1 0x00 BYTE_2 0x02 BYTE_3 0x00
> ------------
>
> I will send you a fix verion of ral driver later.
>
> --
> Quaker
>
> Alexander Wallace:
>
>> Please forgive me for taking so long to reply... I only have access to
>> the laptop in the evenings...
>>
>> Here is the output of the requested command... Thanks in advance for
>> all the help!
>>
>> -bash-3.00# mdb 2 <<EOF
>> > ::status
>> > $<msgbuf
>> > $C
>> > $q
>> > EOF
>> mdb: warning: dump is from SunOS 5.11 snv_43; dcmds and macros may not
>> match kernel implementation
>> debugging crash dump vmcore.2 (64-bit) from tonatzin
>> operating system: 5.11 snv_43 (i86pc)
>> panic message:
>> BAD TRAP: type=0 (#de Divide error) rp=fffffe8000b3c7e0
>> addr=fffffd7fff17f758
>> dump content: kernel pages only
>> MESSAGE
>> pseudo-device: dld0
>> dld0 is /pseudo/dld at 0
>> PCI-device: pci1106,b188 at 1, pci_pci0
>> pci_pci0 is /pci at 0,0/pci1106,b188 at 1
>> pcplusmp: i8042 (i8042) instance 0 vector 0x1 ioapic 0x1 intin 0x1 is
>> bound to cpu 0
>> pcplusmp: i8042 (i8042) instance #0 vector 0xc ioapic 0x1 intin 0xc is
>> bound to
>> cpu 0
>> 8042 device: keyboard at 0, kb8042 # 0
>> kb80420 is /isa/i8042 at 1,60/keyboard at 0
>> 8042 device: mouse at 1, mouse8042 # 0
>> mouse80420 is /isa/i8042 at 1,60/mouse at 1
>> pcplusmp: pciclass,0c0320 (ehci) instance 0 vector 0x15 ioapic 0x1
>> intin 0x15 is bound to cpu 0
>> PCI-device: pci1558,4701 at 10,3, ehci0
>> ehci0 is /pci at 0,0/pci1558,4701 at 10,3
>> PCI-device: pci1558,4701 at 10, uhci0
>> uhci0 is /pci at 0,0/pci1558,4701 at 10
>> PCI-device: pci1558,4701 at 10,1, uhci1
>> uhci1 is /pci at 0,0/pci1558,4701 at 10,1
>> PCI-device: pci1558,4701 at 10,2, uhci2
>> uhci2 is /pci at 0,0/pci1558,4701 at 10,2
>> cpu0: x86 (AuthenticAMD family 15 model 4 step 10 clock 2400 MHz)
>> cpu0: AMD Athlon(tm) 64 Processor 3700+
>> USB 1.10 device (usbac8,301b) operating at full speed (USB 1.x) on USB
>> 1.10 root hub: device at 1, usb_mid0 at bus address 2
>> Z-Star Corp. PC Camera
>> usb_mid0 is /pci at 0,0/pci1558,4701 at 10,2/device at 1
>> /pci at 0,0/pci1558,4701 at 10,2/device at 1 (usb_mid0) online
>> /pci at 0,0/pci1558,4701 at 10,2/device at 1 (usb_mid0): no driver found for
>> interface 0
>> (nodename: 'interface') of Z-Star Corp. PC Camera
>> pcplusmp: pciclass,0c0010 (hci1394) instance 0 vector 0x11 ioapic 0x1
>> intin 0x11 is bound to cpu 0
>> PCI-device: pci1558,4701 at 6, hci13940
>> hci13940 is /pci at 0,0/pci1558,4701 at 6
>> NOTICE: cpqhpc: 64-bit driver module not found
>> WARNING: tzmon: error evaluating _AL object
>> pseudo-device: tzmon0
>> tzmon0 is /pseudo/tzmon at 0
>> pcplusmp: pciclass,060700 (pcic) instance 0 vector 0x10 ioapic 0x1
>> intin 0x10 is bound to cpu 0
>> PCI-device: pci1558,4701 at c, pcic0
>> /pci at 0,0/pci1558,4701 at c/pcs at 0 (pcs0) online
>> NOTICE: cpqhpc: 64-bit driver module not found
>> UltraDMA mode 2 selected
>> dump on /dev/dsk/c0d0s1 size 4102 MB
>> pseudo-device: zfs0
>> zfs0 is /pseudo/zfs at 0
>> pseudo-device: pm0
>> pm0 is /pseudo/pm at 0
>> pseudo-device: power0
>> power0 is /pseudo/power at 0
>> pseudo-device: devinfo0
>> devinfo0 is /pseudo/devinfo at 0
>> pcplusmp: asy (asy) instance 0 vector 0x4 ioapic 0x1 intin 0x4 is
>> bound to cpu 0ISA-device: asy0
>> asy0 is /isa/asy at 1,3f8
>> iscsi0 at root
>> iscsi0 is /iscsi
>> xsvc0 at root
>> xsvc0 is /xsvc
>> pseudo-device: vol0
>> vol0 is /pseudo/vol at 0
>> NOTICE: audiovia823x0: audiovia823x0: xid=0x05c7, vid1=0x414c,
>> vid2=0x4720
>> pcplusmp: pci1106,3059 (audiovia823x) instance 0 vector 0x16 ioapic
>> 0x1 intin 0x16 is bound to cpu 0
>> PCI-device: pci1558,4701 at 11,5, audiovia823x0
>> audiovia823x0 is /pci at 0,0/pci1558,4701 at 11,5
>> pcplusmp: ide (ata) instance #1 vector 0xf ioapic 0x1 intin 0xf is
>> bound to cpu
>> 0
>> pcplusmp: ide (ata) instance #1 vector 0xf ioapic 0x1 intin 0xf is
>> bound to cpu
>> 0
>> ATAPI device at targ 0, lun 0 lastlun 0xfffe
>> model TOSHIBA CD/DVDW SDR6572M
>> ATA/ATAPI-7 supported, majver 0xf8 minver 0x1a
>> PCI-device: ide at 1, ata1
>> ata1 is /pci at 0,0/pci-ide at 11,1/ide at 1
>> UltraDMA mode 2 selected
>> UltraDMA mode 2 selected
>> UltraDMA mode 2 selected
>> sd0 at ata1: target 0 lun 0
>> sd0 is /pci at 0,0/pci-ide at 11,1/ide at 1/sd at 0,0
>> device pciclass,030000 at 0(display#0) keeps up device sd at 0,0(sd#0), but
>> the latter is not power managed
>> pseudo-device: devinfo0
>> devinfo0 is /pseudo/devinfo at 0
>> NOTICE: audiovia823x0: audiovia823x0: xid=0x05c7, vid1=0x414c,
>> vid2=0x4720
>> pcplusmp: pci1106,3059 (audiovia823x) instance 0 vector 0x16 ioapic
>> 0x1 intin 0x16 is bound to cpu 0
>> PCI-device: pci1558,4701 at 11,5, audiovia823x0
>> audiovia823x0 is /pci at 0,0/pci1558,4701 at 11,5
>> pseudo-device: pool0
>> pool0 is /pseudo/pool at 0
>>
>> panic[cpu0]/thread=fffffe8000b3cc80:
>> BAD TRAP: type=0 (#de Divide error) rp=fffffe8000b3c7e0
>> addr=fffffd7fff17f758
>>
>>
>> sched:
>> #de Divide error
>> addr=0xfffffd7fff17f758
>> pid=0, pc=0xfffffffff3c676ae, sp=0xfffffe8000b3c8d0, eflags=0x10246
>> cr0: 8005003b<pg,wp,ne,et,ts,mp,pe> cr4: 6f0<xmme,fxsr,pge,mce,pae,pse>
>> cr2: fffffd7fff17f758 cr3: a6cd000 cr8: c
>> rdi: 4 rsi: fffffffff3c77ab8 rdx: 0
>> rcx: 0 r8: ffffffff8048edd0 r9: 2ee0
>> rax: 907 rbx: 0 rbp: fffffe8000b3c930
>> r10: ffffffff82f820b8 r11: ffff r12: ffffffff82f82090
>> r13: ffffffff82f81000 r14: fa r15: 0
>> fsb: fffffd7fff082000 gsb: fffffffffbc27850 ds: 0
>> es: 0 fs: 1bb gs: 0
>> trp: 0 err: 0 rip: fffffffff3c676ae
>> cs: 28 rfl: 10246 rsp: fffffe8000b3c8d0
>> ss: 30
>>
>> fffffe8000b3c6d0 unix:die+b1 ()
>> fffffe8000b3c7d0 unix:trap+1311 ()
>> fffffe8000b3c7e0 unix:_cmntrap+140 ()
>> fffffe8000b3c930 ral:rt2560_alloc_tx_ring+9e ()
>> fffffe8000b3c9f0 ral:rt2560_attach+23f ()
>> fffffe8000b3ca50 genunix:devi_attach+8c ()
>> fffffe8000b3ca90 genunix:attach_node+a6 ()
>> fffffe8000b3cae0 genunix:i_ndi_config_node+a9 ()
>> fffffe8000b3cb10 genunix:i_ddi_attachchild+45 ()
>> fffffe8000b3cb50 genunix:devi_attach_node+89 ()
>> fffffe8000b3cbb0 genunix:config_immediate_children+120 ()
>> fffffe8000b3cc00 genunix:devi_config_common+a8 ()
>> fffffe8000b3cc60 genunix:mt_config_thread+5a ()
>> fffffe8000b3cc70 unix:thread_start+8 ()
>>
>> syncing file systems...
>> 1
>> 1
>> done
>> dumping to /dev/dsk/c0d0s1, offset 860356608, content: kernel
>>
>>
>> Quaker Fang wrote:
>>
>>> Hi,
>>>
>>> Alexander Wallace:
>>>
>>>> Thank you very much for the response.
>>>>
>>>> Since i don't know much of what you are doing with the mdb, i could
>>>> not correct the command if it needed correction, so the output is as
>>>> follows:
>>>>
>>>> debugging file 'vmcore.2' (object file)
>>>> mdb: invalid command '::msgbuf': unknown dcmd name
>>>
>>>
>>> You are using snv_38 or snv_43, right?
>>>
>>> # cd /var/crash/<hostname>/
>>> # mdb 2 <<EOF
>>>
>>>> ::statusve $<msgbuf
>>>> $C
>>>> $q
>>>> EOF
>>>
>>>
>>> Then, please post the output here.
>>>
>>> --
>>> Quaker
>>>
>>>> I'm attaching the output of the other two commands...
>>>>
>>>> Again, thank you very much for your help.
>>>>
>>>> Quaker Fang wrote:
>>>>
>>>>> Hi Alexander,
>>>>>
>>>>> What's the output of the following commands running under directory
>>>>> /var/crash/<hostname>/
>>>>>
>>>>> mdb <number> <<EOF
>>>>> ::status
>>>>> $<msgbuf
>>>>> $C
>>>>> $q
>>>>> EOF
>>>>>
>>>>> where <number> is the one of those suffix numbers of vmcore.* (your
>>>>> latest core dump).
>>>>> Please post the output here.
>>>>>
>>>>> Then, what's the output of "#/usr/X11/bin/scanpci -v" and "#prtconf
>>>>> -v" ?
>>>>> Please post these here, then I can help to figure out.
>>>>>
>>>>> --
>>>>> Quaker
>>>>>
>>>>> Alexander Wallace:
>>>>>
>>>>>> Hi all!
>>>>>>
>>>>>> I have a laptop with an RT2500 card and was very excited to see a
>>>>>> driver for it in open solaris... I'm running svn 38, and 43... I
>>>>>> tried installing it on both and in both cases, the computer (amd 64
>>>>>> / 2 gig laptop) does a memory (or so it seems) dump and gets
>>>>>> rebooted when running the post install scripts....
>>>>>>
>>>>>> Any clues?
>>>>>>
>>>>>> Thanks!
>>>>>>
>>>>>> _______________________________________________
>>>>>> laptop-discuss mailing list
>>>>>> laptop-discuss at opensolaris.org
>>>>>
>>>
>>>
>>>
>>
>
> _______________________________________________
> laptop-discuss mailing list
> laptop-discuss at opensolaris.org
>
>
