you try this. #add_drv -i "pci1814,201" ral Zhonghui ________________________________
From: Eric Kelly [mailto:[email protected]] Sent: 2008?5?27? 8:38 To: Fu, Zhonghui Subject: Re: [laptop-discuss] Wireless worked before, doesn't work now Unfortunately, it wasn't listed in the file. It's attached, so you can see for yourself. On Mon, May 26, 2008 at 12:11 AM, Fu, Zhonghui <zhonghui.fu at intel.com> wrote: Please do the following steps. 1) #rem_drv ral 2) #add_drv -i "alias of wireless card"(refer driver_alias file in /etc) ral 3) #ifconfig ral0 plumb 4) #scan and connect WLAN Zhonghui ________________________________ From: Eric Kelly [mailto:eric.k.125 at gmail.com] Sent: 2008?5?24? 2:13 To: Fu, Zhonghui Subject: Re: [laptop-discuss] Wireless worked before, doesn't work now Unfortunately, that did not go as planned. I got this: eric at opensolaris:~# add_drv ral devfsadm: driver failed to attach: ral Warning: Driver (ral) successfully added to system but failed to attach So, it seems like it's possibly a driver issue, although it's strange, because it worked before. On Fri, May 23, 2008 at 12:00 AM, Fu, Zhonghui <zhonghui.fu at intel.com> wrote: This prompt message indicate the driver ral have not been installed correctly. So, you need install this driver with add_drv command again. Zhonghui ________________________________ From: Eric Kelly [mailto:eric.k.125 at gmail.com] Sent: 2008?5?23? 4:54 To: Fu, Zhonghui Subject: Re: [laptop-discuss] Wireless worked before, doesn't work now When I tried that command, I got "ifconfig: cannot open link "ral0": No such device or address" 2008/5/22 Fu, Zhonghui <zhonghui.fu at intel.com>: Please do the following step before using network administrator. # ifconfig ral0 plumb Zhonghui -----Original Message----- From: laptop-discuss-bounces at opensolaris.org [mailto:laptop-discuss-bounces at opensolaris.org] On Behalf Of Eric Sent: 2008?5?22? 3:25 To: laptop-discuss at opensolaris.org Subject: Re: [laptop-discuss] Wireless worked before, doesn't work now That error was from the network monitor. The thing that you can add to the taskbar by right-clicking and pressing network on the popup. However, I could not get dladm to scan, show, connect, or disconnect from the wifi! It didn't come up with an error, it just did nothing and went to a new line for another command. By the way, the forum says I am not allowed to edit this message, when I tried to attach the /var/adm/messages file. So, I made a quick website, and uploaded it to there. The link is http://eric.k.125.googlepages.com/opensolaris. This message posted from opensolaris.org _______________________________________________ laptop-discuss mailing list laptop-discuss at opensolaris.org -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://mail.opensolaris.org/pipermail/laptop-discuss/attachments/20080527/6809acb5/attachment.html>
