Judy. Thank you very much for the reply.
The pertinent output for scanpci -v is:
pci bus 0x0000 cardnum 0x05 function 0x00: vendor 0x168c device 0x0013
Atheros Communications, Inc. AR5212 802.11abg NIC
CardVendor 0x144f card 0x7057 (Askey Computer Corp., Card unknown)
STATUS 0x0290 COMMAND 0x0000
CLASS 0x02 0x00 0x00 REVISION 0x01
BIST 0x00 HEADER 0x00 LATENCY 0x00 CACHE 0x00
BASE0 0x80000000 addr 0x80000000 MEM
MAX_LAT 0x1c MIN_GNT 0x0a INT_PIN 0x01 INT_LINE 0x00
And for prtconf -v is (i left some context cuz i'm not sure of the beginning of
the block):
pci144f,7057 (driver not attached)
Hardware properties:
name='assigned-addresses' type=int items=5
value=82002810.00000000.80000000.00000000.00010000
name='reg' type=int items=10
value=00002800.00000000.00000000.00000000.00000000.02002810.00000000.00000000.00000000.00010000
name='compatible' type=string items=7
value='pci168c,13.144f.7057.1' + 'pci168c,13.144f.7057' +
'pci144f,7057' + 'pci168c,13.1' + 'pci168c,13' + 'pciclass,020000' +
'pciclass,0200'
name='model' type=string items=1
value='Ethernet controller'
name='power-consumption' type=int items=2
value=00000001.00000001
name='fast-back-to-back' type=boolean
name='devsel-speed' type=int items=1
value=00000001
name='interrupts' type=int items=1
value=00000001
name='max-latency' type=int items=1
value=0000001c
name='min-grant' type=int items=1
value=0000000a
name='subsystem-vendor-id' type=int items=1
value=0000144f
name='subsystem-id' type=int items=1
value=00007057
name='unit-address' type=string items=1
value='5'
name='class-code' type=int items=1
value=00020000
name='revision-id' type=int items=1
value=00000001
name='vendor-id' type=int items=1
value=0000168c
name='device-id' type=int items=1
value=00000013
pci1558,4701, instance #0
System software properties:
name='reserved-addresses' type=int items=9
value=0000ffff.f0000b00.00000200.0000ffff.f0000d00.00000200.0000ffff.f0000234.00000004
name='ddi-forceattach' type=int items=1
value=00000001
name='active-dma-flush' type=int items=1
value=00000001
name='interrupt-priorities' type=int items=1
value=00000009
Hardware properties:
name='assigned-addresses' type=int items=10
value=82003010.00000000.e0008000.00000000.00000800.82003014.00000000.e0000000.00000000.00004000
name='reg' type=int items=15
value=00003000.00000000.00000000.00000000.00000000.02003010.00000000.00000000.00000000.00000800.02003014.00000000.00000000.00000000.00004000
name='compatible' type=string items=7
value='pci104c,8026.1558.4701.0' + 'pci104c,8026.1558.4701'
+ 'pci1558,4701' + 'pci104c,8026.0' + 'pci104c,8026' + 'pciclass,0c0010' +
'pciclass,0c00'
name='model' type=string items=1
value='FireWire (IEEE 1394) OpenHCI compliant'
Hopefully this can answer the questions...
Again, i thank you very much for your help.
This message posted from opensolaris.org
