Hi,
I see this thread has already been started but I am unable to get open solaris 
to recognize my rt73 usb drive.

root at aries:~#echo ::prtusb |mdb -k
INDEX   DRIVER      INST  NODE            VID.PID     PRODUCT             
1       ohci        0     pci1039,7001    0000.0000   No Product String
2       ohci        1     pci1039,7000    0000.0000   No Product String
3       usb_mid     0     device          046d.c512   USB Receiver
4       usb_mid     2     device          13b1.0020   
Compact Wireless-G USB Adapter
root at aries:~#update_drv -a -i'131b,0020' rum
devfsadm: driver failed to attach: rum
Warning: Driver (rum) successfully added to system but failed to attach
root at aries:~#
nige at aries:~$ grep rum /etc/driver_aliases 
rum "usb7d1,3c03"
rum "usbb05,1723"
rum "usb131b,20"
Sun Microsystems Inc.   SunOS 5.11      snv_86  January 2008
root at aries:~#ifconfig -a
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 
index 1
        inet 127.0.0.1 netmask ff000000 
sfe0: flags=201000802<BROADCAST,MULTICAST,IPv4,CoS> mtu 1500 index 2
        inet 0.0.0.0 netmask 0 
        ether 0:e0:18:1f:5a:94 
lo0: flags=2002000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv6,VIRTUAL> mtu 8252 
index 1

root at aries:~#dmesg |grep usb
Oct 23 19:44:48 aries usba: [ID 912658 kern.info] USB 1.10 device (usb46d,c512) 
operating at low speed (USB 1.x) on USB 1.10 root hub: device at 1, usb_mid0 at 
bus address 2
Oct 23 19:44:48 aries usba: [ID 349649 kern.info]       Logitech USB Receiver
Oct 23 19:44:48 aries genunix: [ID 936769 kern.info] usb_mid0 is /pci at 
0,0/pci1039,7001 at 1,2/device at 1
Oct 23 19:44:48 aries genunix: [ID 408114 kern.info] /pci at 0,0/pci1039,7001 
at 1,2/device at 1 (usb_mid0) online
Oct 23 19:44:48 aries usba: [ID 912658 kern.info] USB 2.0 device (usb13b1,20) 
operating at full speed (USB 1.x) on USB 1.10 root hub: device at 2, usb_mid2 
at bus address 3
Oct 23 19:44:48 aries usba: [ID 349649 kern.info]       Cisco-Linksys ompact 
Wireless-G USB Adapter
Oct 23 19:44:48 aries genunix: [ID 936769 kern.info] usb_mid2 is /pci at 
0,0/pci1039,7001 at 1,2/device at 2
Oct 23 19:44:48 aries genunix: [ID 408114 kern.info] /pci at 0,0/pci1039,7001 
at 1,2/device at 2 (usb_mid2) online
Oct 23 19:44:48 aries usba: [ID 349649 kern.info] usba: no driver found for 
interface 0 (nodename: 'interface') of Cisco-Linksys ompact Wireless-G USB 
Adapter
Oct 23 19:44:48 aries usba: [ID 912658 kern.info] USB 1.10 interface 
(usbif46d,c512.config1.0) operating at low speed (USB 1.x) on USB 1.10 root 
hub: keyboard at 0, hid0 at bus address 2
Oct 23 19:44:48 aries usba: [ID 349649 kern.info]       Logitech USB Receiver
Oct 23 19:44:48 aries usba: [ID 912658 kern.info] USB 1.10 interface 
(usbif46d,c512.config1.1) operating at low speed (USB 1.x) on USB 1.10 root 
hub: mouse at 1, hid1 at bus address 2
Oct 23 19:44:48 aries usba: [ID 349649 kern.info]       Logitech USB Receiver

It sees the device but it still is controlling it using usb_mid driver.
I am completely new to open solaris too, only installed it today :)
--
This message posted from opensolaris.org

Reply via email to