Hi folks I'm getting the following error messages when booting Solaris 5.11 (v74) to both 32bit and 64bit version: APIC Error interupt on CPU 0. Status 0 = 0, Status 1 = 40. sometimes 1 error line, other times up to 4 error lines.
Do anybody have a clue? My self, I do not have a clue about it, and can not find any information about it either. The BIOS does not have the options see or to make changes to any thing else than boot sequence and other not so important things. Can I assume that my laptop will be well behaved when running with these errors? I'm worried about possible implications form this error. As an example - when i used NDIS v1.1 to make and set up my built inn wireless (broadcom 4318), i first did this from 64 bit mode but this resulted in a panic crash after reboot when coming to the point where the GUI should start. Thereafter I made a 32bit boot and installed the 32bit drivers from this mode. This worked fine, so i continued with the project and at the end i ended up with the solution of only to copy the 64bit drivers to their locations without making use of add_drv for the 64bit drivers. this did the trick and everything seems to work fine. I'm running on ASUS A6 notebook. AMD Turion 64 bit. 1.5 Gb RAM. best regards lehaldor This message posted from opensolaris.org
