I've been using a Plextor 716UF DVD burner with my IBM T43p notebook as I have
a 2nd hard disk in place of the slow DVD-burner provided with the notebook.  I 
dual
boot Solaris (snv_42a now) from the 2nd disk using System Commander.

I've been installing Nevada using the USB/2 connection on the Plextor but it 
also has
a Firewire connection.  So I've plugged in an IBM Cardbus Firewire card into 
the single
cardbus slot in the machine and it seems to be recognized OK.  From scanpci I 
get:

pci bus 0x000c cardnum 0x00 function 0x00: vendor 0x104c device 0x8019
 Texas Instruments TSB12LV23 IEEE-1394 Controller

>From prtconf -D I get the following before the drive is powered up:

        pci8086,2448, instance #0 (driver name: pci_pci)
            pci1014,56c, instance #0 (driver name: pcic)
                pcs, instance #0 (driver name: pcs)
                pci104c,100, instance #0 (driver name: hci1394)

After powering the drive, I get:

        pci8086,2448, instance #0 (driver name: pci_pci)
            pci1014,56c, instance #0 (driver name: pcic)
                pcs, instance #0 (driver name: pcs)
                pci104c,100, instance #0 (driver name: hci1394)
                    unit, instance #0 (driver name: scsa1394)
                        disk, instance #4 (driver name: sd)

So it looks to me as it is correctly recognized.  If I put a Solaris 10 Update 2
DVD (burned on the Plextor using the USB/2 interface), volume management
opens a window and the disk looks OK.  However, if I choose the eject function,
it appears not to work.  If the Plextor is connected via USB/2, the eject 
function
ejects the DVD.  Should I expect the eject function to work via Firewire?  Is a
firewire interface fully functional in Nevada?

I also have a Lacie dual interface (Firewire and USB/2) portable hard disk 
enclosure
with a 60 GB 7200 RPM drive with Fat32 format.  I purchased it as some Lacie
dual and triple nterface devices are listed as Solaris Ready for both SPARC and
x86 Solaris on:

http://www.sun.com/io_technologies/lacie.html

The disk and enclosure seems to work fine with Nevada using the USB/2 port.
Should it work correctly with Firewire and Nevada? (It works fine with the 
Cardbus
Firewire card and Windows XP and fine with my iMac using Firewire at home.)

Thanks,

Stuart
 
 
This message posted from opensolaris.org

Reply via email to