--- Casper.Dik at Sun.COM wrote:

> 
> >> > We're dependent on the "madwifi" HAL binary and
> it
> >> > doesn't
> >> > seem to support this newer hardware.
> >
> >What Atheros chipset version does your laptop have?
> I know
> >people at Atheros who are working on the HAL and I
> can ask
> >them if it's supported.
> 
> 5214 (the driver won't attach)  (Well, there's a 4
> at the end
> of the name)
> 
> This one:
> 
> 
>             Node 0x000017
>                 assigned-addresses: 
> 82085010.00000000.d4200000.00000000.00010000
>                 reg: 
>
00085000.00000000.00000000.00000000.00000000.02085010.00000000.00000000.00000000.00010000
>                 compatible: 'pci168c,1b.10cf.1329.1'
> + 'pci168c,1b.10cf.1329' + 'pci10cf,1329' +
> 'pci168c,1b.1' + 'pci168c,1b' + 'pciclass,020000' +
> 'pciclass,0200'
>                 model:  'Ethernet controller'
>                 power-consumption: 
> 00000001.00000001
>                 fast-back-to-back:  
>                 devsel-speed:  00000001
>                 interrupts:  00000001
>                 max-latency:  0000001c
>                 min-grant:  0000000a
>                 subsystem-vendor-id:  000010cf
>                 subsystem-id:  00001329
>                 unit-address:  'a'
>                 class-code:  00020000
>                 revision-id:  00000001
>                 vendor-id:  0000168c
>                 device-id:  0000001b
>                 name:  'pci10cf,1329'
> 
> pci bus 0x0008 cardnum 0x0a function 0x00: vendor
> 0x168c device 0x001b
>  Atheros Communications, Inc.  Device unknown
>  CardVendor 0x10cf card 0x1329 (Card unknown)
>   STATUS    0x0290  COMMAND 0x0116
>   CLASS     0x02 0x00 0x00  REVISION 0x01
>   BIST      0x00  HEADER 0x00  LATENCY 0x50  CACHE
> 0x08
>   BASE0     0xd4200000  addr 0xd4200000  MEM
>   MAX_LAT   0x1c  MIN_GNT 0x0a  INT_PIN 0x01 
> INT_LINE 0x0b
> 
> Casper
> 

How did you figure out which chipset it is? Is it a
pci card that we can remove and look? My prtconf
output is slightly different but scanpci output is the
same. Anyway, it sounds like we'll need to wait a bit
longer.

            Node 0x000016
                assigned-addresses: 
82085010.00000000.b0200000.00000000.00010000
                reg: 
00085000.00000000.00000000.00000000.00000000.02085010.00000000.00000000.00000000.00010000
                compatible: 'pci168c,1b.10cf.1329.1' +
'pci168c,1b.10cf.1329' +
'pci10cf,1329' + 'pci168c,1b.1' + 'pci168c,1b' +
'pciclass,020000' + 'pciclass,0200'
                model:  'Ethernet controller'
                power-consumption:  00000001.00000001
                fast-back-to-back:
                devsel-speed:  00000001
                interrupts:  00000001
                max-latency:  0000001c
                min-grant:  0000000a
                subsystem-vendor-id:  000010cf
                subsystem-id:  00001329
                unit-address:  'a'
                class-code:  00020000
                revision-id:  00000001
                vendor-id:  0000168c
                device-id:  0000001b
                name:  'pci10cf,1329'


pci bus 0x0008 cardnum 0x0a function 0x00: vendor
0x168c device 0x001b
 Atheros Communications, Inc.  Device unknown
 CardVendor 0x10cf card 0x1329 (Card unknown)
  STATUS    0x0290  COMMAND 0x0116
  CLASS     0x02 0x00 0x00  REVISION 0x01
  BIST      0x00  HEADER 0x00  LATENCY 0x50  CACHE
0x08
  BASE0     0xb0200000  addr 0xb0200000  MEM
  MAX_LAT   0x1c  MIN_GNT 0x0a  INT_PIN 0x01  INT_LINE
0x0b

-tony


                
__________________________________ 
Yahoo! Mail - PC Magazine Editors' Choice 2005 
http://mail.yahoo.com

Reply via email to