Hi, iproute2 has a command that perhaps could help you.
ip route add default scope global equalize nexthop dev ppp0 \ nexthop dev ppp1 (actually if you know peer addresses of ppp* use it instead). I've never tried with it but it´s a possibility. You have to have two NIC in your web server; replace ppp0 and ppp1 with eth0 and eth1. Also have a look to Alexey iproute2 because he says that this command equalize load through the 2 NIC. Connect each NIC to each incoming line using 2 different address space. Give a feedback telling us your experiences. Best regards, Leonardo Balliache _______________________________________________ LARTC mailing list / [EMAIL PROTECTED] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
