I need (or would at lest live very much :) to use two Classless Queues in series.
I can't see in the HOWTO how this is done, but guess at something like:
tc qdisc add dev eth0 root handle 1: sfq (etc) tc qdisk add dev eth0 parent 1: tbf (etc)
Am I on the right lines here?
I also have a small problem with TBF... From the HOWTO sec 9.2.2, it is surgested that a value for the 'burst' should be:
"For 10mbit/s on Intel, you need at least 10kbyte buffer if you want to reach your configured rate!"
Therefore: burst => rate * (8 / 1000)
However, I find using this I get stall on ftp and other common protocols, when they get above the throttle rate, with low bandwidths (eg, 64kbit/sec). -- Or I completelly fail to understand the above statement...
Does any person have a better method for calculating a good value for 'buffer' ?
Regards, Ben.
_______________________________________________ LARTC mailing list / [EMAIL PROTECTED] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
