Hi, I'm using HTB for bandwidth control, but i'm still not sure how to
account the traffic. My config is the following: eth0 goes to internet and
eth1 to the clients(I'm shaping both ifaces). I want to log ip traffic
from and to the clients. Since htb shapes outgoing traffic I'm not sure
how to make the iptables script.
This is the script:
${IPTABLES} -N ZORBCOUNTIN
${IPTABLES} -A ZORBCOUNTIN
${IPTABLES} -N ZORBCOUNTOUT
${IPTABLES} -A ZORBCOUNTOUT
${IPTABLES} -I INPUT -i $IFACE -j ZORBCOUNTIN
${IPTABLES} -I OUTPUT -o $IFACE -j ZORBCOUNTOUT
${IPTABLES} -N ZORBCOUNT
${IPTABLES} -I FORWARD -s $NET -o $IFACE -j ZORBCOUNT
${IPTABLES} -I FORWARD -d $NET -i $IFACE -j ZORBCOUNT
grep "^" $IPS | while read IP;
do
${IPTABLES} -A ZORBCOUNT -s $IP
${IPTABLES} -A ZORBCOUNT -d $IP
done;
${IPTABLES} -A ZORBCOUNT -s $NET
${IPTABLES} -A ZORBCOUNT -d $NET
Does iptables count the shaped traffic or the whole traffic without shaping?
which interface should i use in the iptables script, eth0 or eth1 ?
Thank you.
_______________________________________________
LARTC mailing list / [EMAIL PROTECTED]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
