"Zviad O. Giorgadze" wrote: > # Put flow to corresponding classes > tc filter add dev eth0 protocol ip parent 1: u32 match ip dst 192.168.0.1 flowid 1:21 > tc filter add dev eth0 protocol ip parent 1: u32 match ip dst 192.168.0.2 flowid 1:22 > tc filter add dev eth0 protocol ip parent 1: u32 match ip dst 192.168.0.3 flowid 1:23 > tc filter add dev eth0 protocol ip parent 1: u32 match ip dst 192.168.0.4 flowid 1:24 > tc filter add dev eth0 protocol ip parent 1: u32 match ip dst 192.168.0.5 flowid 1:25
If you are NATting, there is no 192.168.0.anything because the address has been NATted. If not, add a prio parameter to these filter lines where prio is NOT = 0. If you are NATting, use an iptables mark and filter on fwmark. Other than that, I can't help you. gypsy _______________________________________________ LARTC mailing list / [EMAIL PROTECTED] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
