Hi....
I'm trying to setup a LAN router with P2P filter
but the problem is that can't "catch" Ares.
There is a way to DROP "ares" p2p packets ?
I've tried with last "ipp2p" snapshot without sucess...
I've
Kernel 2.4.28
iptables 1.3.0
Various Patches from patch-o-matic-ng-20040621
iproute2-ss020116
IMQ Patch
Esfq Patch
Julian (route) Patch
Debian Woody
This is my MANGLE table...
Chain PREROUTING (policy ACCEPT 8557K packets, 2822M bytes)
pkts bytes target prot opt in out source
destination
85574 24M p2ptraffic all -- * * 0.0.0.0/0
0.0.0.0/0
.................
Chain p2ptraffic (1 references)
pkts bytes target prot opt in out source
destination
11860 1620K CONNMARK all -- * * 0.0.0.0/0
0.0.0.0/0 ipp2p v0.7.4 --ipp2p CONNMARK set 0xa
0 0 CONNMARK all -- * * 0.0.0.0/0
0.0.0.0/0 ipp2p v0.7.4 --bit CONNMARK set 0xa
0 0 CONNMARK all -- * * 0.0.0.0/0
0.0.0.0/0 ipp2p v0.7.4 --apple CONNMARK set 0xa
0 0 CONNMARK all -- * * 0.0.0.0/0
0.0.0.0/0 ipp2p v0.7.4 --winmx CONNMARK set 0xa
1 57 CONNMARK all -- * * 0.0.0.0/0
0.0.0.0/0 ipp2p v0.7.4 --soul CONNMARK set 0xa
0 0 DROP all -- * * 0.0.0.0/0
0.0.0.0/0 ipp2p v0.7.4 --ares
.........
54029 13M CONNMARK all -- * * 0.0.0.0/0
0.0.0.0/0 CONNMARK match 0xa CONNMARK restore
But... ARES Packet are not bloked at the momment....
0 0 DROP .... ipp2p v0.7.4 --ares
:-(
Somebody haves sucessfull blocking ARES ?
regards...
Andres.
_______________________________________________
LARTC mailing list
LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
