Andy Furniss wrote:
Andy Furniss wrote:
I haven't checked those figures or tested close to limits though, the
12k burst would need increasing a bit aswell or that will slightly
over limit rate at HZ=1000.
It seems that htb still uses ip level for burst so 12k is enough.
With the overhead at 38 I can ceil at 99mbit OK.
Jonathan spotted that on eth skb->len is ip len + 14 so overhead should
be 24 not 38.
Andy.
_______________________________________________
LARTC mailing list
LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
