Eric, here's the information you requested with the mtu set at 1500 (see
further below):
-------------------------------------------------------------------------------------------------------------------------
[EMAIL PROTECTED]:~# tc -s -d qdisc show dev eth0
qdisc htb 1: r2q 10 default 99 direct_packets_stat 335 ver 3.17
Sent 10388909 bytes 763 pkt (dropped 0, overlimits 372 requeues 0)
rate 0bit 0pps backlog 0b 11p requeues 0
qdisc sfq 10: parent 1:10 limit 128p quantum 1514b flows 128/1024
Sent 10328092 bytes 190 pkt (dropped 0, overlimits 0 requeues 0)
rate 0bit 0pps backlog 707234b 11p requeues 0
qdisc sfq 99: parent 1:99 limit 128p quantum 1514b flows 128/1024
Sent 19927 bytes 188 pkt (dropped 0, overlimits 0 requeues 0)
rate 0bit 0pps backlog 0b 0p requeues 0
[EMAIL PROTECTED]:~# tc filter show dev eth0
filter parent 1: protocol ip pref 49151 u32
filter parent 1: protocol ip pref 49151 u32 fh 801: ht divisor 1
filter parent 1: protocol ip pref 49151 u32 fh 801::800 order 2048 key ht
801 bkt 0 flowid 1:10
match 01bb0000/ffff0000 at 20
filter parent 1: protocol ip pref 49152 u32
filter parent 1: protocol ip pref 49152 u32 fh 800: ht divisor 1
filter parent 1: protocol ip pref 49152 u32 fh 800::800 order 2048 key ht
800 bkt 0 flowid 1:10
match 00500000/ffff0000 at 20
[EMAIL PROTECTED]:~#
-------------------------------------------------------------------------------------------------------------------------
Gypsy, I've been playing with the mtu settings. I had initially set it to
1500, which is what the card should be at as the switch I have does not
support jumbo frames. If I set the mtu to 40,000 for the class the giants
go away and everything seems to fall back into place. However, this seems
waaaaay off what it should be, do you have any idea whats happening? I
cannot seem to adjust the mpu setting.
-------------------------------------------------------------------------------------------------------------------------
updated classes:
tc class add dev eth0 parent 1: classid 1:1 htb rate 1000mbit ceil 1000mbit
mtu 40000
tc class add dev eth0 parent 1:1 classid 1:10 htb rate 512kbit ceil 512kbit
quantum 3000 mtu 40000
tc class add dev eth0 parent 1:1 classid 1:99 htb rate 900mbit ceil
1000mbit quantum 3000 mtu 40000
[EMAIL PROTECTED]:~# tc -s -d class show dev eth0
class htb 1:99 parent 1:1 leaf 99: prio 0 quantum 3000 rate 900000Kbit ceil
1000Mbit burst 489825b/256 mpu 0b overhead 0b cburst 539875b/256 mpu 0b
overhead 0b level 0
Sent 31203 bytes 282 pkt (dropped 0, overlimits 0 requeues 0)
rate 7264bit 8pps backlog 0b 0p requeues 0
lended: 282 borrowed: 0 giants: 0
tokens: 4695 ctokens: 4657
class htb 1:1 root rate 1000Mbit ceil 1000Mbit burst 539875b/256 mpu 0b
overhead 0b cburst 539875b/256 mpu 0b overhead 0b level 7
Sent 1126563 bytes 654 pkt (dropped 0, overlimits 0 requeues 0)
rate 254848bit 15pps backlog 0b 0p requeues 0
lended: 0 borrowed: 0 giants: 0
tokens: 4657 ctokens: 4657
class htb 1:10 parent 1:1 leaf 10: prio 0 quantum 3000 rate 512000bit ceil
512000bit burst 40255b/256 mpu 0b overhead 0b cburst 40255b/256 mpu 0b
overhead 0b level 0
Sent 1104444 bytes 378 pkt (dropped 0, overlimits 0 requeues 0)
rate 250464bit 10pps backlog 0b 6p requeues 0
lended: 372 borrowed: 0 giants: 0
tokens: -694028 ctokens: -694028
[EMAIL PROTECTED]:~# tc -s -d qdisc show dev eth0
qdisc htb 1: r2q 10 default 99 direct_packets_stat 338 ver 3.17
Sent 1609761 bytes 1180 pkt (dropped 0, overlimits 369 requeues 0)
rate 0bit 0pps backlog 0b 3p requeues 0
qdisc sfq 10: parent 1:10 limit 128p quantum 1514b flows 128/1024
Sent 1536378 bytes 509 pkt (dropped 0, overlimits 0 requeues 0)
rate 0bit 0pps backlog 29362b 3p requeues 0
qdisc sfq 99: parent 1:99 limit 128p quantum 1514b flows 128/1024
Sent 32175 bytes 283 pkt (dropped 0, overlimits 0 requeues 0)
rate 0bit 0pps backlog 0b 0p requeues 0
[EMAIL PROTECTED]:~# tc filter show dev eth0
filter parent 1: protocol ip pref 49151 u32
filter parent 1: protocol ip pref 49151 u32 fh 801: ht divisor 1
filter parent 1: protocol ip pref 49151 u32 fh 801::800 order 2048 key ht
801 bkt 0 flowid 1:10
match 01bb0000/ffff0000 at 20
filter parent 1: protocol ip pref 49152 u32
filter parent 1: protocol ip pref 49152 u32 fh 800: ht divisor 1
filter parent 1: protocol ip pref 49152 u32 fh 800::800 order 2048 key ht
800 bkt 0 flowid 1:10
match 00500000/ffff0000 at 20
[EMAIL PROTECTED]:~#
-------------------------------------------------------------------------------------------------------------------------
Thanks.
-Ryan Power
At 04:00 AM 9/12/2006, you wrote:
Message: 4
Date: Tue, 12 Sep 2006 10:36:27 +0200
From: [EMAIL PROTECTED]
Subject: Re: [LARTC] Re: htb traffic shaping problem (Charlie Meyer)
To: lartc@mailman.ds9a.nl
Message-ID:
<[EMAIL PROTECTED]>
Content-Type: text/plain; charset="iso-8859-1"
Hi again,
sorry for my late response. Could you give us also the output of
tc -s -d qdisc show dev eth0
tc filter show dev eth0
It is very strange that the rate and ceil from class 1:10 are set to
512Kbit but the class's rate goes over 3,5Mbits!! ¿Maybe it is a bug?
I'm preparing a similar setup (a linux wan router on a 100Mbit lan with
5Mbps upload/dowload to the Internet. We will see if I run into the same
issues...
Regards,
Eric Janz
At 09:51 PM 9/12/2006, you wrote:
The giants indicate that your MPU (MTU) is wrong. Set it specifically.
Try 1500. Search the archives for "giants" and "MPU" or "MTU".
--
gypsy
_______________________________________________
LARTC mailing list
LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
