Philipp Leusmann wrote: You will need to back off from the rates more and use kbit of course.
tc qdisc add dev $IFACE root handle 1:0 htb default 103
default is bad if $IFACE is eth your arp will go here, also if eth Quantum should be set to ip mtu + 14.
echo "Set root class" # Set root class tc class add dev $IFACE parent 1:0 classid 1:1 htb rate $UPRATE ceil $UPRATE echo "Specify sub classes" # Specify sub classes tc class add dev $IFACE parent 1:1 classid 1:101 htb rate $PRIORATE1 ceil $UPRATE quantum $QUANTUM1 prio 0 tc class add dev $IFACE parent 1:1 classid 1:102 htb rate $PRIORATE2 ceil $UPRATE quantum $QUANTUM2 prio 1 tc class add dev $IFACE parent 1:1 classid 1:103 htb rate $PRIORATE3 ceil $UPRATE quantum $QUANTUM3 prio 2 tc class add dev $IFACE parent 1:1 classid 1:104 htb rate $PRIORATE4 ceil $P2PRATE quantum $QUANTUM4 prio 3
Using different quantums makes more sense if classes have the same prio - like this the higher prio classes get all spare anyway if they need it.
echo "Filter packets" # Filter packets tc filter add dev $IFACE parent 1:0 protocol ip prio 0 handle $MARKPRIO1 fw classid 1:101 tc filter add dev $IFACE parent 1:0 protocol ip prio 1 handle $MARKPRIO2 fw classid 1:102 tc filter add dev $IFACE parent 1:0 protocol ip prio 2 handle $MARKPRIO3 fw classid 1:103 tc filter add dev $IFACE parent 1:0 protocol ip prio 3 handle $MARKPRIO4 fw classid 1:104
Makes no difference as such in this case, but highest prio for filters is 1. Andy. _______________________________________________ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
