Cheers Andy,
That clarifies;-)
Regards,
-nik
Andy Furniss wrote:
Nikolay Kichukov wrote:
Hello Andy,
How do one create such a filter to catch arp/other link layer traffic?
Can
you give us one such example?
A quick test on ingress
#tc qdisc add dev eth0 ingress
Classify all ip traffic
#tc filter add dev eth0 parent ffff: prio 1 protocol ip u32 match u32 0
0 flowid :1
All arp
#tc filter add dev eth0 parent ffff: prio 2 protocol arp u32 match u32 0
0 flowid :2
Anything else
#tc filter add dev eth0 parent ffff: prio 3 protocol all u32 match u32 0
0 flowid :3
Look at the counters
#tc -s filter ls dev eth0 parent ffff:
Delete everything ingress on eth0
#tc qdisc del dev eth0 ingress
You can use ethertype protocol numbers in place of arp/ip.
Use the prio to make sure the catch alls are last in the filters you use
- prio 1 is the highest for filters.
Andy.
_______________________________________________
LARTC mailing list
LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
