I would like to setup some rules for a wireless bridge to do load balancing.
I'd like to dedicate one radio for doing transmit and one for receive.
router
|
|
------------- eth0 ----------------
| |
wlan0 upstream device wlan1
| ^
| |
V ========================== ^
| |
V |
wlan2 downstream device wlan3
| |
------------- eth0 ----------------
|
|
network
All traffic headed to the network will be sent out on wlan0, while all
traffic headed to the router to be sent on wlan3. Is tc capable of doing
something like this, and if so, how would I configure it? I would prefer to
bridge the traffic rather than routing it.
Thanks,
Hampton
_______________________________________________
LARTC mailing list
LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
