Hello!
I was always using "default" in HTB to choose default class, but now I
need to do it with filters. Tried following command:
# tc filter add dev eth0 protocol ip parent 10: prio 2 flowid 10:2
Unknown filter "flowid", hence option "10:2" is unparsable
It is from example in LARTC Howto.
My question is then - how to make a filter matching all without eating
too much CPU cycles?
Thanks
--
Michał Margula, [EMAIL PROTECTED], http://alchemyx.uznam.net.pl/
"W życiu piękne są tylko chwile" [Ryszard Riedel]
_______________________________________________
LARTC mailing list
LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
