On Mon, 3 Sep 2007 22:57:06 +0500 Arman <[EMAIL PROTECTED]> wrote: > I have divided my network into 2 parts now that is 193.168.3.127/25 and > 192.168.3.128/25. I want to route part1 to ISP1 and Part 2 to ISP2. I have > made changes into rules. But I think my Tables T1,T2 are not used and > default table is in use. How can I command to use tables T1,T2 instead of > default table. route command output is > > Destination Gateway Genmask Flags Metric Ref Use > Iface > 192.168.3.0 * 255.255.255.0 U 0 0 0 eth0 > 203.81.213.0 * 255.255.255.0 U 0 0 0 eth2 > 192.168.1.0 * 255.255.255.0 U 0 0 0 eth1 > 169.254.0.0 * 255.255.0.0 U 0 0 0 eth2 > default 203.81.213.1 0.0.0.0 UG 0 0 0 eth2 >
What is in rules? ip rule list You need there: xxxx: from 193.168.3.127/25 lookup T1 xxxx: from 193.168.3.128/25 lookup T2 Then you need NAT. That is all... -- With best regards, Pan'ko Alexander. _______________________________________________ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
