Is quantum not perhaps a bit high? Try setting it lower, and see what
happens?
-justin
On 2007-08-29 08:06, Martin Björnsson wrote:
Hi all,
I'm experimenting with HTB and the prio parameter and it does not give me
results I
expect. I've created 4 HTB classes:
1:10 TCP ACKs (prio 0)
1:20 TCP traffic on dst port 10001 (prio 1)
1:30 TCP traffic on dst port 10000 (prio 2)
1:40 Default (prio 3)
ceil and rate parameters are the same for all 4 classes (rate is 1000kbit and
ceil is
55000kbit).
Then I start 2 TCP flows on src/dst ports 10000 and 10001. The packets seem to
be
correctly classified by the filter (I get hits on classes 10, 20 and 30).
The problem is that I get the same throughput on both TCP flows. Shouldn't I
get about
1000kbit through class 30 and much more through class 20 since it has higher
priority?
Here's my setup script:
#!/bin/sh
/bin/tc qdisc add dev eth0 root handle 1: htb default 40
_______________________________________________
LARTC mailing list
LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
