Hi Daniel. Daniel wrote: > Dear all, > > I have big question in my mind about "tc filter" sintax. If I give "tc -s -d > filter sh dev eth0" command, then the output is like below : > > filter parent 1: protocol ip pref 1 u32 > filter parent 1: protocol ip pref 1 u32 fh 800: ht divisor 1 > filter parent 1: protocol ip pref 1 u32 fh 800::800 order 2048 key ht 800 bkt > 0 flowid 1:2 (rule hit 21553629 > success 37907) > match 00160000/ffff0000 at 20 (success 37907 ) > > ... > > My question is : > 1. What is "fh 800:" and "fh 800::800" mean ? > 2. How I change the value "800" in "fh 800::800" ? I'm guessing this is > default value and I need to change that because my filter rule can be more > than 0xfff line. Hi, that values are for the hash-tables of u32, see: http://lartc.org/howto/lartc.adv-filter.hashing.html
> > Thanks for all, > > Daniel > PadiNet Makassar Bye, Andreas. _______________________________________________ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc