If you use filters, you can use src IP or TOS to send traffic from different clients to different bands. There is no connection tracking in qdisc, the priority mapping is done according to the TC_PRIO. I think this will help http://www.opalsoft.net/qos/DS-23.htm -----Original Message----- From: Archana Rajagopal [mailto:[EMAIL PROTECTED] Sent: Friday, December 07, 2007 10:36 AM To: Salim S I Cc: [email protected] Subject: Re: [LARTC] prio qdisc not wokring Thank you for the reply! Is prio per flow based or per connection based.I mean if I have two clients(two different systems)each sending different flows of traffic, it seems to classify flows from one system but it does not aggregate the flows of same priority of all clients.Is this observation correct?How do I aggregate the flows?
Thank you Archana. On Dec 6, 2007 8:40 PM, Salim S I <[EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]> > wrote: I do not know about TOS, but it can be mapped well with filters. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Archana Rajagopal Sent: Friday, December 07, 2007 2:56 AM To: [email protected] Subject: [LARTC] prio qdisc not wokring Hi, I am working on linux 2.6.16.I tried to prioritize traffic using prio module but its not working well.It always maps to same class irrespective of ToS.Is it possible to fix it using filters?Anybody fixed this problem? -- Regards Archana Rajagopal -- Regards Archana Rajagopal
_______________________________________________ LARTC mailing list [email protected] http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
