FYI;
I found that the following setting ELIMINATED all the cropping bars from the
math bitmapped images produced
$MATH_SCALE_FACTOR = 1.8;
$DISP_SCALE_FACTOR = 1.0;
In general, the higher $MATH_SCALE_FACTOR , the less the number of these
bars. at 1.8, I do not see any. Please see this output I generated using the
above settings
http://12000.org/my_courses/FULLERTON_COURSES/spring_2009/MAE_511_advanced_vibration/project/control_inverted_pendulum/index.htm
and click on the link that says HTML generated by latex2html. You see there
are no more bars !
May be the above will give some l2h expert a hint where the problem could
be?
thanks,
--Nasser
----- Original Message -----
From: "Nasser M. Abbasi" <[email protected]>
To: <[email protected]>
Sent: Thursday, November 12, 2009 7:44 PM
Subject: Re: [l2h] Some bitmapped images produced by latex2html contain
solid edge at the bottom of the image
I think your problem is similar to:
[l2h] cropping bars --- problem persists :(
http://tug.org/mailman/htdig/latex2html/2003-February/002205.html
I have find an interesting observation which can give clue to some l2h
expert where the problem is.
The number of those bars at the edge of bitmapped images is strongly
correlated to the setting of the following 2 paramters on the l2hconf file
$MATH_SCALE_FACTOR = 1.6;
$DISP_SCALE_FACTOR = 1.2;
In particular, by fixing $MATH_SCALE_FACTOR = 1.6, and changing the
$DISP_SCALE_FACTOR, I get different number of edge bar show up in the html
I am working on as following (everything else is constant)
$DISP_SCALE_FACTOR=1.2, number of bars =5
$DISP_SCALE_FACTOR=1.3, number of bars =13
$DISP_SCALE_FACTOR=1.1, number of bars =64
I also get different number of bars show up when I change
MATH_SCALE_FACTOR from 1.6 to say 1.5
The least amount of bars I have found so far (but I did not try much more,
getting tired of this) is
$MATH_SCALE_FACTOR = 1.6;
$DISP_SCALE_FACTOR = 1.2;
So, hopefully this gives someone clue to where the problem is. It is
clearly in the image conversion/generation process.
And btw, where the bars show up, is random. i.e. when
$DISP_SCALE_FACTOR=1.2 those 5 bars that showed up in that case, not all
of them show up again when $DISP_SCALE_FACTOR=1.3.
Thank you,
--Nasser
_______________________________________________
latex2html mailing list
[email protected]
http://tug.org/mailman/listinfo/latex2html
