Thank you. I checked this out. Something either in this or another note gave me a clue - I deleted the niconfig.dat file from the RT box and rebooted it. Then I created a new configuration using this process. Everything works for me now.
I think the error was that the device number of the 6052E had been changed from #4 to #1. Thanks for your help. Kyle -----Original Message----- From: Michael Aivaliotis [mailto:[EMAIL PROTECTED] Sent: Tuesday, April 06, 2004 1:45 PM To: 'Schmidt, Kyle' Subject: RE: LabVIEW 7RT & PXI-1011 & SCXI Here is a link that might help you: <http://www.ni.com/support/install/install_configure_5.htm> > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Schmidt, Kyle > Sent: Tuesday, April 06, 2004 12:35 PM > To: 'Info LabVIEW' > Subject: LabVIEW 7RT & PXI-1011 & SCXI > > > Hello All, > > I was helping a colleague of mine this morning as we > attempted to unravel the mysteries of LabVIEW RT. > > I'm a long time LabVIEW and SCXI users - but the PXI-1011 > combo chassis and the RT controller setup have got me baffled. > > I guess the first question is - can LabVIEW RT address SCXI > modules at all? > > I went through a bunch of configuration hassles, but this is > where I am: > > In Max version 3+, we have the PXI system configured (remote > system, ethernet access). There is the 8175? controller and > a PXI-1052E board. The daq board is in the final PXI slot of > the system. > > Then we have one SCXI-1121 module in the first slot of the > PXI's SCXI slots. > > Initially, there didn't seem like anyway to add that > SCXI-1121 to the PXI configuration - because it is configured > as remote. But then I used the Remote configuration utility > to configure it. In fact, I discovered that there was a > configuration there (probably done by the field sales > engineer - thanks Graham) - I toyed with it and discovered > that saving it did indeed update the config file on the RT > unit (confirmed through FTP). > > But - I try a simple RT example, and it won't allow me to use > SCXI channel strings. Also, it won't allow me to use a > logical channel that was configured to access the SCXI > channel. I get -10007 error. > > Anyone have any ideas? > > Thanks, > > Kyle > > R. Kyle Schmidt, P. Eng. > Senior Research Engineer > Messier-Dowty Inc. "The Landing Gear Company" > [EMAIL PROTECTED] > (905) 683-3100 x1473 > > " NOTICE - This e-mail message may contain privileged, > confidential, or proprietary information intended only for > the use of the intended recipient. If you are not the > intended recipient of this e-mail, you are hereby notified > that any use, dissemination, distribution or reproduction of > this e-mail is prohibited. If you have received this e-mail > in error, please notify Messier-Dowty Inc. immediately and > delete this e-mail and all attachments from your computer > system. Any views expressed in this e-mail are those of the > individual sender and may not necessarily reflect the views > of Messier-Dowty Inc. > > NOTICE - Cet e-mail peut contenir des informations > privilégiées, confidentielles ou de la propriété de > Messier-Dowty Inc. uniquement destinées à l'usage du > destinataire. Si vous n'êtes pas le destinataire de cet > e-mail, nous vous informons que tout usage, diffusion, > distribution ou reproduction de cet e-mail est interdit. Si > vous avez reçu cet e-mail par erreur, nous vous remercions > d'en informer Messier-Dowty Inc. immédiatement et d'en > effacer son contenu ainsi que tout document joint de votre > système informatique. Les opinions formulées dans cet e-mail > sont celles des expéditeurs et ne reflètent pas > nécessairement la position de Messier-Dowty Inc." > > > >
