Hello Annie and Ldoms team,
I am currently having issues with LDOM configurations on
both of the machines. Both of servers came with pre-installed.
I have also opened the case with Sun on this problems. The support
engineer did not know how to troubleshoot this error. Here is the case
number: 70979344.
ok boot
T5240, No Keyboard
Copyright 2008 Sun Microsystems, Inc. All rights reserved.
OpenBoot 4.30.0, 1024 MB memory available, Serial #86438504.
Ethernet address 0:21:28:26:f2:68, Host ID: 8526f268.
Boot device: /pci at 400/pci at 0/pci at 8/scsi at 0/disk at 0 File and args:
-r
SunOS Release 5.10 Version Generic_138888-03 64-bit
Copyright 1983-2008 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
NOTICE: nxge0: xcvr addr:0x1d - link is down
NOTICE: nxge2: xcvr addr:0x1b - link is down
NOTICE: nxge1: xcvr addr:0x1c - link is down
NOTICE: nxge4: xcvr addr:0x0d - link is down
NOTICE: nxge3: xcvr addr:0x1a - link is down
NOTICE: nxge0: xcvr addr:0x1d - link is up 1000 Mbps full duplex
NOTICE: nxge5: xcvr addr:0x0c - link is down
NOTICE: nxge2: xcvr addr:0x1b - link is up 1000 Mbps full duplex
NOTICE: nxge1: xcvr addr:0x1c - link is up 1000 Mbps full duplex
NOTICE: nxge3: xcvr addr:0x1a - link is up 1000 Mbps full duplex
Apr 29 17:01:11 svc.startd[7]: network/pfil:default failed: transitioned
to maintenance (see 'svcs -xv' for details)
WARNING: /etc/svc/volatile: File system full, swap space limit exceeded
WARNING: /etc/svc/volatile: File system full, swap space limit exceeded
WARNING: /etc/svc/volatile: File system full, swap space limit exceeded
WARNING: /etc/svc/volatile: File system full, swap space limit exceeded
WARNING: /etc/svc/volatile: File system full, swap space limit exceeded
WARNING: /etc/svc/volatile: File system full, swap space limit exceeded
WARNING: /etc/svc/volatile: File system full, swap space limit exceeded
WARNING: /etc/svc/volatile: File system full, swap space limit exceeded
WARNING: /etc/svc/volatile: File system full, swap space limit exceeded
WARNING: /etc/svc/volatile: File system full, swap space limit exceeded
WARNING: /etc/svc/volatile: File system full, swap space limit exceeded
INIT: Couldn't write persistent state file
`/etc/svc/volatile/init.state'.
WARNING: /etc/svc/volatile: File system full, swap space limit exceeded
Apr 29 17:06:37 svc.startd[7]: Failed to add
svc:/network/routing/legacy-routing:ipv4 (Software caused connection
abort).
WARNING: /etc/svc/volatile: File system full, swap space limit exceeded
WARNING: /etc/svc/volatile: File system full, swap space limit exceeded
WARNING: /etc/svc/volatile: File system full, swap space limit exceeded
Apr 29 17:07:38 svc.startd[7]: svc:/network/physical:default: Method
"/lib/svc/method/net-physical" failed due to signal KILL.
WARNING: /etc/svc/volatile: File system full, swap space limit exceeded
WARNING: /etc/svc/volatile: File system full, swap space limit exceeded
WARNING: /etc/svc/volatile: File system full, swap space limit exceeded
Apr 29 17:09:36 svc.startd[7]: svc:/system/filesystem/root:default:
Method or service exit timed out. Killing contract 9.
Apr 29 17:10:36 svc.startd[7]: svc:/system/filesystem/root:default:
Method "/lib/svc/method/fs-root" failed due to signal KILL.
Another issue this same server.
boot cdrom
Boot device: /pci at 400/pci at 0/pci at 1/pci at 0/usb at 0,2/storage at
2/disk at 0:f File
and args:
SunOS Release 5.10 Version Generic_137137-09 64-bit
Copyright 1983-2008 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
WARNING: vsw0: device (nxge0) open failed rv:16
WARNING: vsw0: device (nxge0) open failed rv:16
WARNING: vsw1: device (nxge1) open failed rv:16
WARNING: vsw1: device (nxge1) open failed rv:16
WARNING: vsw4: device (nxge4) open failed rv:16
WARNING: vsw4: device (nxge4) open failed rv:16
WARNING: vsw3: device (nxge3) open failed rv:16
WARNING: vsw3: device (nxge3) open failed rv:16
WARNING: vsw2: device (nxge2) open failed rv:16
WARNING: vsw2: device (nxge2) open failed rv:16
WARNING: vsw5: device (nxge5) open failed rv:16
WARNING: vsw5: device (nxge5) open failed rv:16
Configuring devices.
NOTICE: nxge4: xcvr addr:0x1d - link is up 1000 Mbps full duplex
NOTICE: nxge2: xcvr addr:0x0b - link is up 1000 Mbps full duplex
NOTICE: nxge5: xcvr addr:0x1c - link is up 1000 Mbps full duplex
NOTICE: nxge3: xcvr addr:0x0a - link is up 1000 Mbps full duplex
NOTICE: nxge6: xcvr addr:0x1b - link is up 1000 Mbps full duplex
NOTICE: nxge7: xcvr addr:0x1a - link is up 1000 Mbps full duplex
WARNING: /pci at 400/pci at 0/pci at 8/scsi at 0/sd at 0,0 (sd0):
Corrupt label; wrong magic number
NOTICE: nxge0: xcvr addr:0x0d - link is down
NOTICE: nxge1: xcvr addr:0x0c - link is down
NOTICE: nxge2: xcvr addr:0x0b - link is up 1000 Mbps full duplex
NOTICE: nxge3: xcvr addr:0x0a - link is up 1000 Mbps full duplex
NOTICE: nxge4: xcvr addr:0x1d - link is up 1000 Mbps full duplex
NOTICE: nxge5: xcvr addr:0x1c - link is up 1000 Mbps full duplex
NOTICE: nxge6: xcvr addr:0x1b - link is up 1000 Mbps full duplex
NOTICE: nxge0: xcvr addr:0x0d - link is down
NOTICE: nxge7: xcvr addr:0x1a - link is up 1000 Mbps full duplex
NOTICE: nxge1: xcvr addr:0x0c - link is down
NOTICE: nxge2: xcvr addr:0x0b - link is up 1000 Mbps full duplex
NOTICE: nxge3: xcvr addr:0x0a - link is up 1000 Mbps full duplex
NOTICE: nxge4: xcvr addr:0x1d - link is up 1000 Mbps full duplex
NOTICE: nxge5: xcvr addr:0x1c - link is up 1000 Mbps full duplex
NOTICE: nxge6: xcvr addr:0x1b - link is up 1000 Mbps full duplex
/sbin/install-discovery: fork failed - too many processes
Apr 29 21:07:28 svc.startd[7]: svc:/system/install-discovery:default:
Method "/sbin/install-discovery < /dev/console > /dev/console 2>&1"
failed with exit status 1.
ln: cannot create /tmp/devices/devices: Operation not applicable
Configuring devices.
devfsadmd: daemon pid 28 is already running
Using RPC Bootparams for network configuration information.
Attempting to configure interface nxge6...
Skipped interface nxge6
Attempting to configure interface nxge5...
Skipped interface nxge5
Attempting to configure interface nxge4...
Skipped interface nxge4
Attempting to configure interface nxge3...
Skipped interface nxge3
Attempting to configure interface nxge2...
Skipped interface nxge2
Attempting to configure interface nxge1...
Skipped interface nxge1
Attempting to configure interface nxge0...
Skipped interface nxge0
Attempting to configure interface vsw5...
Skipped interface vsw5
Attempting to configure interface vsw4...
Skipped interface vsw4
Attempting to configure interface vsw3...
Skipped interface vsw3
Attempting to configure interface vsw2...
Skipped interface vsw2
Attempting to configure interface vsw1...
Skipped interface vsw1
Attempting to configure interface vsw0...
Skipped interface vsw0
Reading ZFS config: done.
Setting up Java. Please wait...
NOTE: Not enough memory for graphical installation. Graphical
installation
requires 96 MB of virtual memory. Found 8 MB of virtual memory.
Reverting to text-based installation.
Serial console, reverting to text install
Beginning system identification...
Apr 29 21:35:55 svc.startd[7]: svc:/system/cryptosvc:default: Couldn't
fork to execute method /usr/sbin/cryptoadm start: Resource temporarily
unavailable
Searching for configuration file(s)...
WARNING: Module verification failed for
/platform/SUNW,T5240/kernel/drv/sparcv9/ncp.
/sbin/sysidfind: fork failed - too many processes
Search complete.
/sbin/install-setup: fork failed - too many processes
Apr 29 21:44:52 svc.startd[7]: svc:/system/system-log:default: Method or
service exit timed out. Killing contract 18.
Discovering additional network configuration...
/usr/sbin/sysidnet: Couldn't start user interface
/sbin/install-setup: fork failed - too many processes
/sbin/install-setup: fork failed - too many processes
Apr 29 21:57:26 svc.startd[7]: svc:/system/system-log:default: Method
"/lib/svc/method/system-log" failed with exit status 1.
/sbin/install-setup: fork failed - too many processes
/sbin/install-begin: fork failed - too many processes
Apr 29 22:09:58 svc.startd[7]: svc:/system/install-setup:default:
Couldn't fork to execute method /sbin/install-setup > /dev/console <
/dev/console 2>&1: Resource temporarily unavailable
Exiting to shell...
# #
One more error with the same issue. This is after power off and power
back on the machine.
k boot
Boot device: disk File and args:
SunOS Release 5.10 Version Generic_138888-03 64-bit
Copyright 1983-2008 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
NOTICE: nxge0: xcvr addr:0x1d - link is down
NOTICE: nxge2: xcvr addr:0x1b - link is down
NOTICE: nxge1: xcvr addr:0x1c - link is down
NOTICE: nxge4: xcvr addr:0x0d - link is down
NOTICE: nxge5: xcvr addr:0x0c - link is down
NOTICE: nxge3: xcvr addr:0x1a - link is down
NOTICE: nxge2: xcvr addr:0x1b - link is up 1000 Mbps full duplex
NOTICE: nxge0: xcvr addr:0x1d - link is up 1000 Mbps full duplex
NOTICE: nxge1: xcvr addr:0x1c - link is up 1000 Mbps full duplex
NOTICE: nxge3: xcvr addr:0x1a - link is up 1000 Mbps full duplex
panic[cpu0]/thread=180e000: main: unable to fork init.
000000000180ba10 genunix:main+410 (18f7c68, 18f3800, 185b2a0, 18ab400,
182b598, 18fa000)
%l0-3: 000000000101a800 00000000018fa000 00000000018fa000
0000000000000002
%l4-7: 00000000018faec0 00000000018fac00 00000000018f7c78
00000000018f7c00
syncing file systems... done
skipping system dump - no dump device configured
rebooting...
Resetting...
T5240, No Keyboard
Copyright 2008 Sun Microsystems, Inc. All rights reserved.
OpenBoot 4.30.0, 768 MB memory available, Serial #86438504.
Ethernet address 0:21:28:26:f2:68, Host ID: 8526f268.
{0}ok
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Here is an error with another T5240. I was able to bring 27 LDOMs up
online. When I attempted to bind the 28th Ldom I got the following
errors
INIT: fork() for svc.startd failed: Resource temporarily unavailable.
Will retry in 1 second...
INIT: fork() for svc.startd failed: Resource temporarily unavailable.
Will retry in 1 second...
INIT: fork() for svc.startd failed: Resource temporarily unavailable.
Will retry in 1 second...
INIT: fork() for svc.startd failed: Resource temporarily unavailable.
Will retry in 1 second...
INIT: fork() for svc.startd failed: Resource temporarily unavailable.
Will retry in 1 second...
INIT: fork() for svc.startd failed: Resource temporarily unavailable.
Will retry in 1 second...
INIT: fork() for svc.startd failed: Resource temporarily unavailable.
Will retry in 1 second...
INIT: fork() for svc.startd failed: Resource temporarily unavailable.
Will retry in 1 second...
INIT: fork() for svc.startd failed: Resource temporarily unavailable.
Will retry in 1 second...
INIT: fork() for svc.startd failed: Resource temporarily unavailable.
Will retry in 1 second...
INIT: fork() for svc.startd failed: Resource temporarily unavailable.
Will retry in 1 second...
INIT: fork() for svc.startd failed: Resource temporarily unavailable.
Will retry in 1 second...
INIT: fork() for svc.startd failed: Resource temporarily unavailable.
Will retry in 1 second...
INIT: fork() for svc.startd failed: Resource temporarily unavailable.
Will retry in 1 second...
INIT: fork() for svc.startd failed: Resource temporarily unavailable.
Will retry in 1 second...
INIT: fork() for svc.startd failed: Resource temporarily unavailable.
Will retry in 1 second...
INIT: fork() for svc.startd failed: Resource temporarily unavailable.
Will retry in 1 second...
INIT: fork() for svc.startd failed: Resource temporarily unavailable.
Will retry in 1 second...
INIT: fork() for svc.startd failed: Resource temporarily unavailable.
Will retry in 1 second...
INIT: fork() for svc.startd failed: Resource temporarily unavailable.
Will retry in 1 second...
INIT: fork() for svc.startd failed: Resource temporarily unavailable.
Will retry in 1 second...
INIT: fork() for svc.startd failed: Resource temporarily unavailable.
Will retry in 1 second...
At this point, I can issue any commands at all. Not even a ls command.
Please look into this.
If you have any questions, please give a call @ (650)527-1968
Thanks and regards.
Toan.
From: Thanh Van [mailto:[email protected]]
Sent: Friday, May 01, 2009 4:04 PM
To: Toan Nguyen
Subject: [Fwd: Re: LDOM On T5240]
FYI
-------- Original Message --------
Subject:
Re: LDOM On T5240
Date:
Fri, 01 May 2009 15:16:03 -0700
From:
Annie Chan <Annie.Chan at sun.com> <mailto:Annie.Chan at sun.com>
Organization:
Western Region SE
To:
Thanh Van <thanh_van at symantec.com> <mailto:thanh_van at symantec.com>
CC:
Annie.Chan at sun.com
References:
<49F9D6B0.6050506 at symantec.com> <mailto:49F9D6B0.6050506 at symantec.com>
<49F9EE6B.2010808 at Sun.COM> <mailto:49F9EE6B.2010808 at Sun.COM>
Hi TV,
I just realized that the information in my previous email is wrong.
Minimum memory per guest domain is
1GB. So my suggestion to try 512MB will not work. My error... and
apologize for this.
Also I review the document (url is below), click Section 1 (New)
Hardware, there are best practices on memory assign to each domain.
http://wikis.sun.com/display/SolarisLogicalDomains/LDoms%20Community%20C
ookbook
Thanks,
Annie
On 04/30/09 11:31 AM, Annie Chan wrote:
HI TV,
Technically you don't have 1GB free memory available to you. Apparently
the hypervisor
on the T5240 requires ~128MB memory to operate. Perhaps reducing memory
size
for the 31st LDom to less than 1GB, let's try 512MB to see if the 31st
LDom can successfully bind.
Please let me know the outcome. Thank you!
Regards,
Annie
<http://www.sun.com>
Annie Chan
Sales Systems Engineer
Sun Microsystems, Inc.
4040 Palm Drive,, M/S# USCA04-203
Santa Clara, CA 95054 US
Phone (650) 688-9985 x49985
Mobile (408) 307-1192
Fax (408) 276-8069
Email Annie.Chan at Sun.COM
<http://www.sun.com/emrkt/sigs/q04.gif>
On 04/30/09 09:49 AM, Thanh Van wrote:
Hi Annie,
Here is an out put of the ldom configured:
bash-3.00# ldm bind thor504v29; ldm start thor504v29; ldm list
bash-3.00# ./ldm list
NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME
primary active -n-cv- SP 4 1G 6.9% 1h 1m
thor504v1 active -t---- 5000 4 1G 25% 2h 51m
thor504v10 active -t---- 5009 4 1G 25% 2h 51m
thor504v11 active -t---- 5010 4 1G 25% 2h 51m
thor504v12 active -t---- 5011 4 1G 25% 2h 51m
thor504v13 active -t---- 5012 4 1G 25% 2h 51m
thor504v14 active -t---- 5013 4 1G 25% 2h 51m
thor504v15 active -n---- 5014 4 1G 0.4% 53m
thor504v16 active -t---- 5015 4 1G 25% 2h 51m
thor504v17 active -t---- 5016 4 1G 25% 2h 51m
thor504v18 active -t---- 5017 4 1G 25% 2h 51m
thor504v19 active -t---- 5018 4 1G 25% 2h 51m
thor504v2 active -t---- 5001 4 1G 25% 2h 51m
thor504v20 active -t---- 5019 4 1G 25% 2h 51m
thor504v21 active -n---- 5020 4 1G 0.3% 1h 59m
thor504v22 active -n---- 5021 4 1G 0.2% 1h 57m
thor504v23 active -n---- 5022 4 1G 0.2% 1h 48m
thor504v24 active -n---- 5023 4 1G 0.3% 1h 47m
thor504v25 active -n---- 5024 4 1G 0.2% 1h 29m
thor504v26 active -n---- 5025 4 1G 0.2% 1h 25m
thor504v27 active -n---- 5026 4 1G 0.2% 1h 16m
thor504v28 active -n---- 5027 4 1G 0.3% 1h 14m
thor504v29 active -n---- 5028 4 1G 0.2% 1h 3m
thor504v3 active -t---- 5002 4 1G 25% 2h 51m
thor504v30 active -n---- 5029 4 1G 0.3% 30m
thor504v4 active -t---- 5003 4 1G 25% 2h 51m
thor504v5 active -t---- 5004 4 1G 25% 2h 51m
thor504v6 active -t---- 5005 4 1G 25% 2h 51m
thor504v7 active -t---- 5006 4 1G 25% 2h 51m
thor504v8 active -t---- 5007 4 1G 25% 2h 51m
thor504v9 active -t---- 5008 4 1G 25% 2h 51m
thor504v31 inactive ------ 4 1G
bash-3.00# ./ldm bind thor504v31
Not enough free memory present to meet this request
Could not bind requested memory for LDom thor504v31
bash-3.00# Connection to thor504.engba.symantec.com closed by foreign
host.
--
Thanks & Best Regards,
Thanh Van {TV}
SYMANTEC Corporation
Storage & Availability Management Group [SAMG]
350 Ellis Street - MTV-B4003
Mountain View, CA 94043
Phone: (650)-527-4689
Fax: (650)-527-1982
Email: thanh_van at symantec.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://mail.opensolaris.org/pipermail/ldoms-discuss/attachments/20090501/7aebb707/attachment.html>
