Hi
I am facing a strange issue during jumpstart of a guest ldom through jumpstart
server.
Jumpstart stops at ?configuring interface vnet0? and if I press cntl+c I get a
message as show below..
Configured interface vnet0
^CJan 7 13:05:25 svc.startd[7]: svc:/system/install-discovery:default: Method
"/sbin/install-discovery < /dev/console > /dev/console 2>&1" failed with exit
status 130.
ln: cannot create /tmp/devices/devices: Operation not applicable
Configuring devices.
devfsadmd: daemon pid 28 is already running
Using RPC Bootparams for network configuration information.
Attempting to configure interface vnet0...
Any help or pointer would be greatly appreciated. Below is the setup that I
have.
bash-3.00# ldm add-vnet vnet0 primary-vsw0 oam-ldm1
LDom "oam-ldm1" was not found
bash-3.00# ldm list
NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME
primary active -n-cv SP 8 6G 0.2% 4h 7m
oam-ld1 active -td-- 5000 8 3G 12% 5m
bash-3.00# ldm add-vnet vnet0 primary-vsw0 oam-ld1
------------------------------------------------------------------------------
Notice: LDom oam-ld1 is in the process of a delayed reconfiguration.
Any changes made to this LDom will only take effect after it reboots.
------------------------------------------------------------------------------
bash-3.00# ldm stop-domain oam-ld1
LDom oam-ld1 stopped
bash-3.00# ldm list-bindings oam-ld1
NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME
oam-ld1 bound ----- 5000 8 3G
MAC
00:14:4f:fa:e7:bd
VCPU
VID PID UTIL STRAND
0 16 100%
1 17 100%
2 18 100%
3 19 100%
4 20 100%
5 21 100%
6 22 100%
7 23 100%
MEMORY
RA PA SIZE
0xe000000 0x18e000000 3G
VARIABLES
auto-boot?=true
boot-device=disk net
NETWORK
NAME SERVICE DEVICE MAC
vnet0 primary-vsw0 at primary network at 0
00:14:4f:f9:38:b8
PEER MAC
primary-vsw0 at primary 00:14:4f:fb:65:57
DISK
NAME VOLUME TOUT DEVICE SERVER
ldom1 ldom1 at primary-vds0 disk at 0 primary
VCONS
NAME SERVICE PORT
oam-ld1 primary-vcc0 at primary 5000
bash-3.00# ldm unbind-domain oam-ld1
Jan 7 13:00:57 integra ldc: WARNING: ldc_close: (0x10) cannot read qptrs
bash-3.00# ldm bind-domain oam-ld1
bash-3.00# ldm start-domain oam-ld1
LDom oam-ld1 started
bash-3.00#
bash-3.00#
bash-3.00# telnet 0 5000
Trying 0.0.0.0...
Connected to 0.
Escape character is '^]'.
Connecting to console "oam-ld1" in group "oam-ld1" ....
Press ~? for control options ..
{0} ok
{0} ok
{0} ok
{0} ok
{0} ok
{0} ok boot net -vv install
T5240, No Keyboard
Copyright 2008 Sun Microsystems, Inc. All rights reserved.
OpenBoot 4.28.8, 3072 MB memory available, Serial #66774973.
Ethernet address 0:14:4f:fa:e7:bd, Host ID: 83fae7bd.
Boot device: /virtual-devices at 100/channel-devices at 200/network at 0 File
and args: -vv install
Requesting Internet Address for 0:14:4f:f9:38:b8
Using RARP/BOOTPARAMS...
Internet address is: 10.16.82.70
hostname: oam
domainname: rwc.nis
Found 10.16.82.54 @ 8:0:20:f9:a0:3a
root server: sfo-jumpstart-n2 (10.16.82.54)
root directory: /u0/sol100508/Solaris_10/Tools/Boot
Size: 0x9c860+0x33f51+0x5f223 Bytes
krtld: Unused kernel arguments: `install'.
module /platform/SUNW,T5240/kernel/sparcv9/unix: text at [0x1000000, 0x109c85f]
data at 0x1800000
module misc/sparcv9/krtld: text at [0x109c860, 0x10b6d7f] data at 0x1893178
module /platform/SUNW,T5240/kernel/sparcv9/genunix: text at [0x10b6d80,
0x1227b3f] data at 0x18990c0
module /platform/SUNW,T5240/kernel/misc/sparcv9/platmod: text at [0x1227b40,
0x1227b57] data at 0x18efa90
module /platform/SUNW,T5240/kernel/cpu/sparcv9/SUNW,UltraSPARC-T2+: text at
[0x1227b60, 0x122d537] data at 0x18f01c0
SunOS Release 5.10 Version Generic_127127-11 64-bit
Copyright 1983-2008 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
Ethernet address = 0:14:4f:fa:e7:bd
Using default device instance data
mem = 3145728K (0xc0000000)
avail mem = 2966937600
root nexus = T5240
pseudo0 at root
pseudo0 is /pseudo
scsi_vhci0 at root
scsi_vhci0 is /scsi_vhci
pseudo-device: dld0
dld0 is /pseudo/dld at 0
virtual-device: cnex0
cnex0 is /virtual-devices at 100/channel-devices at 200
Requesting Internet address for 0:14:4f:f9:38:b8
Found my IP address: a105246 (10.16.82.70)
hostname: oam
domainname: rwc.nis
root on sfo-jumpstart-n2:/u0/sol100508/Solaris_10/Tools/Boot fstype nfsdyn
cpu0: UltraSPARC-T2+ (cpuid 0 clock 1165 MHz)
cpu1: UltraSPARC-T2+ (cpuid 1 clock 1165 MHz)
cpu2: UltraSPARC-T2+ (cpuid 2 clock 1165 MHz)
cpu3: UltraSPARC-T2+ (cpuid 3 clock 1165 MHz)
cpu4: UltraSPARC-T2+ (cpuid 4 clock 1165 MHz)
cpu5: UltraSPARC-T2+ (cpuid 5 clock 1165 MHz)
cpu6: UltraSPARC-T2+ (cpuid 6 clock 1165 MHz)
cpu7: UltraSPARC-T2+ (cpuid 7 clock 1165 MHz)
Configuring devices.
pseudo-device: devinfo0
devinfo0 is /pseudo/devinfo at 0
pseudo-device: pseudo1
pseudo1 is /pseudo/zconsnex at 1
channel-device: vdc0
vdc0 is /virtual-devices at 100/channel-devices at 200/disk at 0
pseudo-device: fssnap0
fssnap0 is /pseudo/fssnap at 0
pseudo-device: ramdisk1024
ramdisk1024 is /pseudo/ramdisk at 1024
pseudo-device: winlock0
winlock0 is /pseudo/winlock at 0
pseudo-device: llc10
llc10 is /pseudo/llc1 at 0
pseudo-device: lofi0
lofi0 is /pseudo/lofi at 0
pseudo-device: fcp0
fcp0 is /pseudo/fcp at 0
pseudo-device: fcsm0
fcsm0 is /pseudo/fcsm at 0
pseudo-device: trapstat0
trapstat0 is /pseudo/trapstat at 0
pseudo-device: pool0
pool0 is /pseudo/pool at 0
pseudo-device: ntwdt0
ntwdt0 is /pseudo/ntwdt at 0
pseudo-device: mdesc0
mdesc0 is /pseudo/mdesc at 0
pseudo-device: zfs0
zfs0 is /pseudo/zfs at 0
pseudo-device: ds_snmp0
ds_snmp0 is /pseudo/ds_snmp at 0
pseudo-device: ds_pri0
ds_pri0 is /pseudo/ds_pri at 0
pseudo-device: fcode0
fcode0 is /pseudo/fcode at 0
pseudo-device: drctl0
drctl0 is /pseudo/drctl at 0
Using RPC Bootparams for network configuration information.
Attempting to configure interface vnet0...
Configured interface vnet0
^CJan 7 13:05:25 svc.startd[7]: svc:/system/install-discovery:default: Method
"/sbin/install-discovery < /dev/console > /dev/console 2>&1" failed with exit
status 130.
ln: cannot create /tmp/devices/devices: Operation not applicable
Configuring devices.
devfsadmd: daemon pid 28 is already running
Using RPC Bootparams for network configuration information.
Attempting to configure interface vnet0...
Configured interface vnet0
^[[2~mdesc0 is /pseudo/mdesc at 0
pseudo-device: zfs0
zfs0 is /pseudo/zfs at 0
pseudo-device: ds_snmp0
ds_snmp0 is /pseudo/ds_snmp at 0
pseudo-device: ds_pri0
ds_pri0 is /pseudo/ds_pri at 0
pseudo-device: fcode0
fcode0 is /pseudo/fcode at 0
pseudo-device: drctl0
drctl0 is /pseudo/drctl at 0
Using RPC Bootparams for network configuration information.
Attempting to configure interface vnet0...
Configured interface vnet0
^CJan 7 13:05:25 svc.startd[7]: svc:/system/install-discovery:default: Method
"/sbin/install-discovery < /dev/console > /dev/console 2>&1" failed with exit
status 130.
ln: cannot create /tmp/devices/devices: Operation not applicable
Configuring devices.
devfsadmd: daemon pid 28 is already running
Using RPC Bootparams for network configuration information.
Attempting to configure interface vnet0...
Configured interface vnet0
\
http://opensolaris.org/os/community/on/flag-days/pages/2008010701/
--
This message posted from opensolaris.org
