On Fri, Feb 15, 2008 at 3:06 AM, Liam Merwick <Liam.Merwick at sun.com> wrote:
> nthai at jpl.nasa.gov wrote:
>
>> I'm having problem jumpstarting my guest domain. Below is the message
>> when I try to jumpstart. Can anyone help?
>>
>> Thanks
>>
>> {0} ok boot dev11i-vnet1 -v install
>
> You are using the name of the vnet in the LDoms configuration - you'll need to
> use the device path or a devalias to it.
>
> Example:
> {0} ok show-nets
> a) /virtual-devices at 100/channel-devices at 200/network at 0
> q) NO SELECTION Enter Selection, q to quit: a
> /virtual-devices at 100/channel-devices at 200/network at 0 has been selected.
> Type ^Y ( Control-Y ) to insert it in the command line. e.g. ok nvalias
> mydev ^Y for creating devalias mydev for
> /virtual-devices at 100/channel-devices at 200/network at 0
> {0} ok boot /virtual-devices at 100/channel-devices at 200/network at 0 -
> install
Are there any other known causes of this problem? I'm seeing it on a
T2000 with LDoms_Manager-1.1-earlyaccess. I'm working on getting to
1.1-RR but am fighting a proxy server that seems to have switched to
dial-up. In any case, I'm suspecting a hardware reset will clear it
up as this config has worked in the past. I'd like to figure this out
without a reset so that this doesn't become the standard
outage-inducing answer whenever it comes up.
{0} ok show-nets
a) /virtual-devices at 100/channel-devices at 200/network at 0
b) /virtual-devices at 100/channel-devices at 200/network at 1
q) NO SELECTION
Enter Selection, q to quit: a
/virtual-devices at 100/channel-devices at 200/network at 0 has been selected.
Type ^Y ( Control-Y ) to insert it in the command line.
e.g. ok nvalias mydev ^Y
for creating devalias mydev for
/virtual-devices at 100/channel-devices at 200/network at 0
{0} ok boot /virtual-devices at 100/channel-devices at 200/network at 0 -
install
Boot device: /virtual-devices at 100/channel-devices at 200/network at 0 File
and args: - install
WARNING: /virtual-devices at 100/channel-devices at 200/network at 0: Receiving
packet from LDC but LDC is Not Up!
WARNING: /virtual-devices at 100/channel-devices at 200/network at 0:
Communication error with Virtual Network Server!
ERROR: boot-read fail
--
Mike Gerdts
http://mgerdts.blogspot.com/
