Please any help/suggestion will be great for the below issue that I am
dealing when I try to Jumpstart a new Guest Domain (LDOM version 1.0.3).
I am not getting any answer back from the Jumpstart Server.
I have run : snoop -d e1000g0 mac-address of vnic2 but I do not see any
informations related to that specific
MAC address.
The new Server is a T6300 Blade server and there is a new Guest Domain,
I have already configured the
Resources for the Guest Domain (see below details).
I have performed other time this process in the past but for some
reasons I am not getting the same
outcame this time.
=========================================================
# ifconfig -a
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu
8232 index 1
inet 127.0.0.1 netmask ff000000
vsw0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index
2
inet 146.126.97.174 netmask ffffff00 broadcast 146.126.97.255
ether 0:14:4f:fb:1f:56
vsw1: flags=1000842<BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 3
inet 0.0.0.0 netmask 0
ether 0:14:4f:fa:c6:57
vsw2: flags=1000842<BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 4
inet 0.0.0.0 netmask 0
ether 0:14:4f:f9:23:14
vsw3: flags=1000842<BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 5
inet 0.0.0.0 netmask 0
ether 0:14:4f:fb:df:b0
e1000g0: flags=1000842<BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index
6
inet 0.0.0.0 netmask 0
ether 0:14:4f:ae:3c:b0
e1000g1: flags=1000802<BROADCAST,MULTICAST,IPv4> mtu 1500 index 7
inet 0.0.0.0 netmask 0
ether 0:14:4f:ae:3c:b1
e1000g2: flags=1000842<BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index
8
inet 0.0.0.0 netmask 0
ether 0:14:4f:e1:8e:e
e1000g3: flags=1000802<BROADCAST,MULTICAST,IPv4> mtu 1500 index 9
inet 0.0.0.0 netmask 0
ether 0:14:4f:e1:8e:f
gaxgpvm05xs#
ldm list -l
NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME
primary active -n-cv SP 4 2G 0.4% 1h 54m
SOFTSTATE
Solaris running
VCPU
VID PID UTIL STRAND
0 0 0.5% 100%
1 1 0.2% 100%
2 2 0.4% 100%
3 3 0.4% 100%
MEMORY
RA PA SIZE
0x8000000 0x8000000 2G
VARIABLES
boot-device=/pci at 7c0/pci at 0/pci at 2/scsi at 0/disk at 0,0:a disk net
keyboard-layout=US-English
nvramrc=devalias vx-rootdg01 /pci at 7c0/pci at 0/pci at 2/scsi at 0/disk
at 0,0:a
devalias vx-rootdg02 /pci at 7c0/pci at 0/pci at 2/scsi at 0/disk at 1,0:a
use-nvramrc?=true
IO
DEVICE PSEUDONYM OPTIONS
pci at 780 bus_a
pci at 7c0 bus_b
VCC
NAME PORT-RANGE
primary-vcc0 5000-5100
VSW
NAME MAC NET-DEV DEVICE MODE
primary-vsw0 00:14:4f:fb:1f:56 e1000g0 switch at 0
primary-vsw1 00:14:4f:fa:c6:57 e1000g1 switch at 1
primary-vsw3 00:14:4f:fb:df:b0 e1000g3 switch at 3
primary-vsw2 00:14:4f:f9:23:14 e1000g2 switch at 2
VDS
NAME VOLUME OPTIONS DEVICE
primary-vds0 vol1
/LDOMS/LDOM-GAXGPSW03VQ/vdsk0_95gb.img
VCONS
NAME SERVICE PORT
SP
------------------------------------------------------------------------
------
NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME
gaxgpsw03vq active -t--- 5000 8 5G 12% 1h 9m
SOFTSTATE
OpenBoot Running
VCPU
VID PID UTIL STRAND
0 4 0.0% 100%
1 5 7.3% 100%
2 6 35% 100%
3 7 84% 100%
4 12 100% 100%
5 13 0.0% 100%
6 14 0.0% 100%
7 15 0.0% 100%
MEMORY
RA PA SIZE
0x8000000 0x88000000 5G
VARIABLES
auto-boot?=false
NETWORK
NAME SERVICE DEVICE MAC
vnic2 primary-vsw2 at primary network at 0
00:14:4f:f9:db:32
DISK
NAME VOLUME TOUT DEVICE SERVER
vdisk1 vol1 at primary-vds0 disk at 0 primary
VCONS
NAME SERVICE PORT
gaxgpsw03vq primary-vcc0 at primary 5000
Thanks in advance.
Roberto
