You may be running into a bug listed in Alexandre's blog http://blogs.sun.com/achartre/category/LDoms see section under File which will list the bug. What update of Solaris and LDOM version are you running?
Brad..... Ramesh Mudradi wrote: > Any help would be greately appreciated. I am having issue while jumpstarting > a guest domain, fails with the disk label error. Virtual disk is a file image > on a zfs file system. > > Checking rules.ok file... > Using profile: disk0_ldom_flar > Executing JumpStart preinstall phase... > Searching for SolStart directory... > Checking rules.ok file... > Using begin script: install_begin > Using finish script: patch_finish > Executing SolStart preinstall phase... > Executing begin script "install_begin"... > Begin script install_begin execution completed. > > Processing profile > - Opening Flash archive > - Validating Flash archive > - Selecting all disks > - Configuring boot device > - Configuring / (c0d0s0) > - Configuring swap (c0d0s1) > - Configuring /u0 (c0d0s5) > > Verifying disk configuration > - WARNING: Changing the system's default boot device in the EEPROM > > Verifying space allocation > NOTE: 1 archives did not include size information > > Preparing system for Flash install > > Configuring disk (c0d0) > - Creating Solaris disk label (VTOC) > > ERROR: Could not create Solaris disk label (VTOC) > > ERROR: Could not label disks > > ERROR: Could not update disks with new configuration > > ERROR: Flash installation failed > Solaris installation program exited. > # format > Searching for disks...done > > > AVAILABLE DISK SELECTIONS: > 0. c0d0 <SUN-DiskImage-70GB cyl 48057 alt 2 hd 1 sec 3054> > /virtual-devices at 100/channel-devices at 200/disk at 0 > Specify disk (enter its number): 0 > selecting c0d0 > [disk formatted, no defect list found] > > > FORMAT MENU: > disk - select a disk > type - select (define) a disk type > partition - select (define) a partition table > current - describe the current disk > format - format and analyze the disk > repair - repair a defective sector > show - translate a disk address > label - write label to the disk > analyze - surface analysis > defect - defect list management > backup - search for backup labels > verify - read and display labels > save - save new disk/partition definitions > volname - set 8-character volume name > !<cmd> - execute <cmd>, then return > quit > format> p > > > PARTITION MENU: > 0 - change `0' partition > 1 - change `1' partition > 2 - change `2' partition > 3 - change `3' partition > 4 - change `4' partition > 5 - change `5' partition > 6 - change `6' partition > 7 - change `7' partition > select - select a predefined table > modify - modify a predefined partition table > name - name the current table > print - display the current table > label - write partition map and label to the disk > !<cmd> - execute <cmd>, then return > quit > partition> p > Current partition table (original): > Total disk cylinders available: 48057 + 2 (reserved cylinders) > > Part Tag Flag Cylinders Size Blocks > 0 root wm 5365 - 13412 11.72GB (8048/0/0) 24578592 > 1 swap wu 0 - 5364 7.81GB (5365/0/0) 16384710 > 2 backup wm 0 - 48056 69.98GB (48057/0/0) 146766078 > 3 unassigned wm 0 0 (0/0/0) 0 > 4 unassigned wm 0 0 (0/0/0) 0 > 5 unassigned wm 13413 - 48056 50.45GB (34644/0/0) 105802776 > 6 unassigned wm 0 0 (0/0/0) 0 > 7 unassigned wm 0 0 (0/0/0) 0 > > partition> la > Ready to label disk, continue? yes > > Warning: error writing VTOC. > Warning: no backup labels > Label failed. > > > > > > bash-3.00# ldm ls -l > NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME > primary active -n-cv SP 4 1G 0.6% 3h 22m > > SOFTSTATE > Solaris running > > VCPU > VID PID UTIL STRAND > 0 0 7.5% 100% > 1 1 11% 100% > 2 2 6.6% 100% > 3 3 9.0% 100% > > MAU > ID CPUSET > 0 (0, 1, 2, 3) > > MEMORY > RA PA SIZE > 0x8000000 0x8000000 1G > > VARIABLES > diag-switch?=true > > IO > DEVICE PSEUDONYM OPTIONS > pci at 780 bus_a > pci at 7c0 bus_b > > VCC > NAME PORT-RANGE > primary-vcc0 5000-5100 > > VSW > NAME MAC NET-DEV DEVICE MODE > primary-vsw0 00:14:4f:f9:48:61 e1000g0 switch at 0 > > VDS > NAME VOLUME OPTIONS DEVICE > primary-vds0 vol1 /ldoms/tps10-ld1/root > > VCONS > NAME SERVICE PORT > SP > > ------------------------------------------------------------------------------ > NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME > tps10-ld1 active -n--- 5000 2 1G 0.0% 40m > > SOFTSTATE > Solaris running > > VCPU > VID PID UTIL STRAND > 0 4 15% 100% > 1 5 3.0% 100% > > MEMORY > RA PA SIZE > 0x8000000 0x48000000 1G > > VARIABLES > auto-boot?=true > boot-device=disk > net= > > NETWORK > NAME SERVICE DEVICE MAC > vnet1 primary-vsw0 at primary network at 0 > 00:14:4f:fa:2d:28 > > DISK > NAME VOLUME TOUT DEVICE SERVER > vdisk1 vol1 at primary-vds0 disk at 0 primary > > > VCONS > NAME SERVICE PORT > tps10-ld1 primary-vcc0 at primary 5000 > > bash-3.00# > -- > This message was posted from opensolaris.org > _______________________________________________ > ldoms-discuss mailing list > ldoms-discuss at opensolaris.org > http://mail.opensolaris.org/mailman/listinfo/ldoms-discuss >
