Hi Alex, I can not say about Oracle on ZFS since I haven't touch such configuration. But for the Oracle in guest domains with data on raw devices there is no much difference as without domains. The hardest part of delivering storage devices into guest domains you already did ;-)
In one word, I hope very soon we will have something to share. Roman. > Hi Pomah, > > Yes we only have one lun which is accessible with two > paths. However, I already created a zpool as follows, > which the virtual disk is exported multiple times. > The reason for using zpool is the cloning > capabilities. I am working toward completing the R2 > installation. Please let me know if you have any > recommendation/procedure/best practices for deploying > R2 in LDoms. Thanks. > > > > 2. c3t4d5 <EMC-SYMMETRIX-102.30GB> > /pci at 400/pci at 0/pci at c/fibre-channel at 0/sd at e6,11 > 3. c5t50d5 <EMC-SYMMETRIX-102.30GB> > /pci at 500/pci at 0/pci at 9/fibre-channel at 0/sd at e6,11 > ool create local c3t4d5 > zfs create ?V 100g local/oracle > > ldm add-vdiskserverdevice /dev/zvol/dsk/local/oracle > ora1 at primary-vds0 > ldm add-vdiskserverdevice /dev/zvol/dsk/local/oracle > ora2 at primary-vds0 > > ldm add-vdisk vdisk1 ora1 at primary-vds0 ldom1 > ldm add-vdisk vdisk1 ora2 at primary-vds0 ldom2 -- This message was posted from opensolaris.org
