Hi
I have exported the full disk to the guest domain. However I am facing the
following error during jumpstart installation of Solaris 10 8/07.
[i]Starting Solaris installation program...
Executing JumpStart preinstall phase...
Searching for SolStart directory...
Checking rules.ok file...
Using begin script: install_begin
Using finish script: patch_finish
Executing SolStart preinstall phase...
Executing begin script "install_begin"...
Begin script install_begin execution completed.
Warning
One or more disks are found, but one ofthe
following problems exists:
> Hardware failure
> Unformatted disk.[/i]
This is for the Hitachi storage disk device.
[b] 3. c1t50060E801042A430d34 <HITACHI-DF600F-0000-10.00GB>
/pci at 7c0/pci at 0/pci at 1/pci at 0,2/SUNW,qlc at 1/fp at 0,0/ssd
at w50060e801042a430,21[/b]
[b]# ldm ls-bindings testdom3[/b]
[i]NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME
testdom3 inactive ----- 7 2G
VARIABLES
boot-device=/virtual-devices at 100/channel-devices at 200/disk at 0:a disk
net
keyboard-layout=US-English
NETWORK
NAME SERVICE DEVICE MAC
vnet3 primary-vsw0 network at 0 00:14:4f:f8:a7:76
DISK
NAME VOLUME TOUT DEVICE SERVER
vdisk4 vol4 at primary-vds0 disk at 0
VCONS
NAME SERVICE PORT[/i]
[b]# ldm list-bindings primary[/b]
[i]NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME
primary active -n-cv SP 4 4G 0.5% 3d 2h 19m
MAC
00:14:4f:0e:bf:ca
VCPU
VID PID UTIL STRAND
0 0 0.5% 100%
1 1 0.6% 100%
2 2 0.4% 100%
3 3 0.6% 100%
MAU
CPUSET
(0, 1, 2, 3)
MEMORY
RA PA SIZE
0x8000000 0x8000000 4G
IO
DEVICE PSEUDONYM OPTIONS
pci at 780 bus_a
pci at 7c0 bus_b
VDS
NAME VOLUME OPTIONS DEVICE
primary-vds0 vol1 /dev/dsk/c2t1d0s2
vol2
/dev/zvol/rdsk/primarydisk1/root-testdom2
vol3
/dev/zvol/rdsk/primarydisk1/swap-testdom2
vol4
/dev/dsk/c1t50060E801042A430d34s2
CLIENT VOLUME
vdisk1 at testdom1 vol1
root-testdom2 at testdom2 vol2
swap-testdom2 at testdom2 vol3
vdisk4 at testdom3 vol4
VCC
NAME PORT-RANGE
primary-vcc0 5000-5100
CLIENT PORT
testdom1 at testdom1 5000
testdom2 at testdom2 5001
testdom3 at testdom3 5002
VSW
NAME MAC NET-DEV DEVICE MODE
primary-vsw0 00:14:4f:fa:f0:89 e1000g2 switch at 0 prog,promisc
PEER MAC
vnet1 at testdom1 00:14:4f:f7:af:11
vnet2 at testdom2 00:14:4f:fb:ca:d6
vnet3 at testdom3 00:14:4f:f8:a7:76
VCONS
NAME SERVICE PORT
SP[/i]
I guess the problem is with the device driver of Hitachi disks during jumpstart.
Please advice ...
Vinod.
--
This message was posted from opensolaris.org
