On Dec 21, 2007 2:33 AM, Pol Barthelemy <Pol.Barthelemy at sun.com> wrote: > Hello, > I try to use the figure 5.3 from the Ldom Admin guide "Configuring and > Using IPMP in the Service domain" in order to avoid using IPMP on the > guest domain. > I try some test by pulling out the cable from the e1000g0 interface, > virtual IP on the service domain switches correctly to the second > interface, but I looses contact with the guest Ldom. > Is anybody can give me an example how to configure this kink of > configuration. > My Ldom configuration is designed as below : > > VSW > NAME MAC NET-DEV DEVICE MODE > primary-vsw0 00:14:4f:f9:89:7d e1000g0 switch at 0 prog,promisc
You need to configure primary-vsw1 on e1000g1 then give the guest LDOM a vnic on primary-vsw1. Then configure IPMP in the guest LDOM as well. You will need to use probe-based IPMP because link state is not propagated to guest LDOMs and as such link-based IPMP will never see a failure. -- Mike Gerdts http://mgerdts.blogspot.com/
