Hey Everyone
I have a T2000 currently with 4 guest domains. I am trying to use 2 virtual
switches in the primary domain, where the underlying physical adapters are
connected to separte switch ports in separte vlans (public and private),
unsuccessfully.
Here is an overview of the setup in the primary domain:
e1000g0 (plumbed as vsw0) = public IP = port on cisco switch is in vlan1
e1000g1 (plumbed as vsw1) = private IP = port on cisco switch is in vlan2
VSW
NAME MAC NET-DEV DEVICE MODE
primary-vsw0 00:14:4f:82:b7:de e1000g0 switch at 0 prog,promisc
primary-vsw1 00:14:4f:82:b7:df e1000g1 switch at 1 prog,promisc
3 of the domains which have vnets on primary-vsw0 (primary interface in the
primary domain) work fine, but in the forth domain i am trying to add a vnet
from primary-vsw1 (address is just plumbed in the primary domain but no routing
info)
Im probably really missing something here. Do I have to have the primary domain
multihomed in order to have guest domains on different networks?
Any reference to some docs and any suggestions would be very welcome. I found
another question here that seemed similar but is unanswered.
http://forum.java.sun.com/thread.jspa?messageID=10199491#10199491
Thanks very much,
Deejam
--
This message was posted from opensolaris.org
