On a T5220, in the Control Domain I did this:
# dladm create-aggr -d e1000g1 -d e1000g3 -d e1000g4 1
# dladm show-aggr
key: 1 (0x0001) policy: L4 address: 0:14:4f:97:87:69 (auto)
device address speed duplex link
state
e1000g1 0:14:4f:97:87:69 1000 Mbps full up
attached
e1000g3 0:14:4f:97:87:6b 1000 Mbps full up
attached
e1000g4 0:15:17:3a:92:18 1000 Mbps full up
attached
# ldm add-vsw net-dev=aggr1 primary-vsw0 primary
# Ifconfig vsw0 plumb 10.1.1.110
# ifconfig e1000g0 unplumb
# dladm add-aggr -d e1000g0 1
# mv /etc/hostname.e1000g0 /etc/hostname.vsw0
--
This message was posted from opensolaris.org
