Hi
I have installed v7.1.0g of the firmware for Sun Enterprise T5x20
with LDOM 1.0.3. On the power down/OFF on the T5220, the second
virtual switch goes missing and has be be created and binded.
root at brmcntrl1 # ldm list-services primary
VCC
NAME PORT-RANGE
primary-vcc0 5000-5100
VSW
NAME MAC NET-DEV DEVICE MODE
primary-vsw0 00:14:4f:f8:e0:d1 e1000g0 switch at 0
primary-vsw1 00:14:4f:fa:a4:20 e1000g1 switch at 1
On 2 occasions domain had to be brought down for hardware replacement .
When controller domain came back up I could not bind the guests .
It was complain that vsw1 did not exist .
root at brmcntrl1 # ldm list-services primary
VCC
NAME PORT-RANGE
primary-vcc0 5000-5100
VSW
NAME MAC NET-DEV DEVICE MODE
primary-vsw0 00:14:4f:f8:e0:d1 e1000g0 switch at 0
Had to reconfigure -- >
root at brmcntrl1 # ldm add-vsw net-dev=e1000g1 primary-vsw1 primary
Then bind guests and start .
This only occurs when the system is power cycled . Does not happen with normal
reboot .
Any ideas why its losing its vsw1 config info ?
Mo Beik
