I have a system running with update 4 and the 127127-11 KU patch. I've created
both SVM and ZFS volumes and turned them into vdsdevs with no options. So they
should be presented as whole disks. However, this is what I'm seeing in the
guest domain:
# format
Searching for disks...done
AVAILABLE DISK SELECTIONS:
0. c0d0 <DGC-RAID5-0219 cyl 32766 alt 2 hd 64 sec 10>
/virtual-devices at 100/channel-devices at 200/disk at 0
1. c0d1 <DGC-RAID5-0219 cyl 32766 alt 2 hd 64 sec 10>
/virtual-devices at 100/channel-devices at 200/disk at 1
2. c0d2 <SUN-DiskImage-100MB cyl 339 alt 2 hd 1 sec 600>
/virtual-devices at 100/channel-devices at 200/disk at 2
3. c0d3 <SUN-DiskImage-20GB cyl 4367 alt 2 hd 1 sec 9600>
/virtual-devices at 100/channel-devices at 200/disk at 3
Specify disk (enter its number): ^D
The c0d2 is a 6GB SVM soft partition, so the label is totally wrong. I've tried
this with different sized SVM volumes, no go. However, c0d3, which is a ZFS 20G
volume has the correct label. Is there an issue with SVM volumes and VDS? I
also noticed that if I don't use a SVM soft parition, it doesn't work at all..
I end up seeing one of the underline disks in the meta device, not the volume.
Any ideas? Are there any recommended patches other than the 127127-11 for u4?
Thanks again!
Octave
--
This message was posted from opensolaris.org
