Hi, This is because /dev/dsk/c2t200700A0B82987C2d1s3 is already in use. Check what is already using this slice. "fuser /dev/dsk/c2t200700A0B82987C2d1s3" can help.
alex. Dan Weinman wrote: > I am getting the following error when trying to use one particular lun on a > 6140 array. > > Jan 29 14:25:46 t2000 vds: [ID 137619 kern.info] vd_setup_full_disk(): > ldi_open_by_dev() returned errno 16 for slice 3 > Jan 29 14:25:46 t2000 vds: [ID 556514 kern.info] vds_add_vd(): Failed to add > vdisk ID 1 > > I have no problems with any of the other 9 luns. The lun is useable from > solaris, as I can newfs and mount a file system on it, but can't use it as a > disk for a guest domain. > > The bindings from the control and guest domain. volx and vdiskx are the vds > and vdisk in question. > > root at t2000 #ldm list-bindings > NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME > primary active -n-cv SP 8 4G 0.4% 4h 29m > > MAC > 00:14:4f:21:c1:94 > > VCPU > VID PID UTIL STRAND > 0 0 0.5% 100% > 1 1 0.2% 100% > 2 2 0.1% 100% > 3 3 0.0% 100% > 4 4 2.2% 100% > 5 5 0.1% 100% > 6 6 0.0% 100% > 7 7 0.0% 100% > > MAU > CPUSET > (0, 1, 2, 3) > (4, 5, 6, 7) > > MEMORY > RA PA SIZE > 0x8000000 0x8000000 4G > > VARIABLES > use-nvramrc?=true > > IO > DEVICE PSEUDONYM OPTIONS > pci at 780 bus_a > pci at 7c0 bus_b > > VDS > NAME VOLUME OPTIONS DEVICE > primary-vds0 vol1 > /ldomsbootpool/ldoms/ldom1/ldom1.bootdisk > vol2 > /ldomsbootpool/ldoms/ldom2/ldom1.bootdisk > vol3 > /dev/zvol/rdsk/ldomsvolpool/vol1 > vol4 > /dev/rdsk/c2t200700A0B82987C2d5s0 > vol5 > /usr2/bootdisks/ldom1.bootdisk > vol6 > /usr2/datadisks/ldom1.datadisk > volx > /dev/dsk/c2t200700A0B82987C2d1s2 > CLIENT VOLUME > vdisk1 at ldom1 vol1 > vdisk3 at ldom1 vol3 > vdisk4 at ldom1 vol4 > vdisk5 at ldom1 vol5 > vdisk6 at ldom1 vol6 > vdiskx at ldomx volx > > VCC > NAME PORT-RANGE > primary-vcc0 5000-5100 > CLIENT PORT > ldom1 at ldom1 5000 > ldomx at ldomx 5001 > > VSW > NAME MAC NET-DEV DEVICE MODE > primary-vsw0 00:14:4f:21:c1:94 e1000g0 switch at 0 prog,promisc > PEER MAC > vnet1 at ldom1 00:14:4f:fa:a3:31 > vnet1 at ldomx 00:14:4f:f8:50:54 > > VCONS > NAME SERVICE PORT > SP > > ------------------------------------------------------------------------------ > > NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME > ldomx bound ----- 5001 4 1920M > > MAC > 00:14:4f:f8:24:b3 > > VCPU > VID PID UTIL STRAND > 0 16 100% > 1 17 100% > 2 18 100% > 3 19 100% > > MEMORY > RA PA SIZE > 0x8000000 0x188000000 1920M > > NETWORK > NAME SERVICE DEVICE MAC > vnet1 primary-vsw0 at primary network at 0 > 00:14:4f:f8:50:54 > PEER MAC > primary-vsw0 at primary 00:14:4f:21:c1:94 > vnet1 at ldom1 00:14:4f:fa:a3:31 > > DISK > NAME VOLUME TOUT DEVICE SERVER > vdiskx volx at primary-vds0 disk at 0 primary > > > VCONS > NAME SERVICE PORT > ldomx primary-vcc0 at primary 5001 > > The error happens when the bind-domain command is used. > -- > This message was posted from opensolaris.org > _______________________________________________ > ldoms-discuss mailing list > ldoms-discuss at opensolaris.org > http://mail.opensolaris.org/mailman/listinfo/ldoms-discuss
