--
I have installed Ldom manager 1.0.1 and security tookit. I've used
the ldm to setup VDS, VCC, VSW from the blueprint. When I tried to
plumb the virtual interface i get Invalid argument. Can someone help?
Below are the configuration. From the list-services the VSW primary
name is primary-vsw00 instead of primary-vsw0, is that an issue?
Nicole
root:nbs-uglb008 :[/root] /opt/SUNWldm/bin/ldm list-services primary
VDS
NAME VOLUME OPTIONS DEVICE
primary-vds0
VCC
NAME PORT-RANGE
primary-vcc0 5000-5100
VSW
NAME MAC NET-DEV DEVICE MODE
primary-vsw00 00:14:4f:f9:cd:1a e1000g0 switch at 0 prog,promisc
root:nbs-uglb008 :[/root] ifconfig -a
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu
8232 index 1
inet 127.0.0.1 netmask ff000000
bge0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
inet 137.78.46.159 netmask ffffff00 broadcast 137.78.46.255
ether 0:14:4f:95:a:74
bge1: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 3
inet 192.168.1.216 netmask ffffff00 broadcast 192.168.1.255
ether 0:14:4f:95:a:75
root:nbs-uglb008 :[/root] ifconfig vsw0 plumb
ifconfig: plumb: vsw0: Invalid argument
root:nbs-uglb008 :[/root] ifconfig vsw00 plumb
ifconfig: plumb: vsw00: Invalid argument
